Thank you for your reply. As far as I can see there is no point
specifying subnet that consists of more than one PC in tinc config if
you are going to install tinc on every PC in the subnet anyway. Correct
me if I'm wrong.
Now, assuming I'm right, there will be PCs in the subnet that don't have
tinc installed on them. How to configure these PCs so they are a part of
the subnet and participate in routing?
Cheers,
Andrew
On 6/10/2010 10:13 p.m., Cédric Lemarchand wrote:
Hi,
I am not sure to understand what you mean with "joining" a subnet.
But if your "local computer" need to reach the "remote subnet" served
by tinc, you can set the local IP of the local tinc server as the
default gateway, or add a route to the remote subnet via the local
tinc IP. Of course, computer located on the remote subnet need the
same thing.
Cédric
Le 06/10/10 09:37, Andrew Savinykh a écrit :
Hello all,
I understand that each tinc daemon corresponds to one or more subnets
that it "owns" a subnet can be a single ip or more.
Could you please tell me what do I need to do to join a computer in
local network (windows) to a subnet served by tinc?
Thank you in advance,
Andrew
_______________________________________________
tinc mailing list
[email protected]
http://www.tinc-vpn.org/cgi-bin/mailman/listinfo/tinc
--
*Cédric Lemarchand – iXSea SAS*
Administrateur Système & Réseaux
http://www.ixsea.com/ - <[email protected]>
<mailto:[email protected]>
Tel: +33 1 30 08 8888 – GSM: +33 6 37 23 40 93
_______________________________________________
tinc mailing list
[email protected]
http://www.tinc-vpn.org/cgi-bin/mailman/listinfo/tinc
_______________________________________________
tinc mailing list
[email protected]
http://www.tinc-vpn.org/cgi-bin/mailman/listinfo/tinc
