Donald,
Excellent! Now I think I finally understand how to do this. Thank you
very much. (Just to confirm, I need to assign the new additional IP on
physical adapter for each non tinc PC and on tap adapter for tinc
gateway PCs, right?)
Andrew
PS. for some reason not all my messages reach the list, so I'm
resubmitting this one in hope that it's show up.
I sent another message thanking Alan for his suggestion as it totally
makes sense to me. the only thing with that suggestion is that
broadcasts won't be possible.
That message didn't show up either.
On 7/10/2010 2:14 p.m., Donald Pearson wrote:
Sure it's possible, you just need to assign each node a new IP in the
10.30.1.0/24 <http://10.30.1.0/24> network. It's not part of the
Tinc configuration, it's part of the network configuration of each
computer.
All Tinc is doing, is creating a layer 2 path for them to reach each
other. Yes broadcasts will traverse the VPN. It literally is
virtual ethernet over the internet. :)
On Wed, Oct 6, 2010 at 9:04 PM, Andrew Savinykh <[email protected]
<mailto:[email protected]>> wrote:
Donald, thank you for this.
Do i read you right that to be able to receive broadcasts across
LANs I have to use the address space that I already have and make
sure that this space is the same for both LANs?
What I'm trying to do is to define a *completely new subnet* that
will act as the common LAN foR both LAN A and LAN B.
To re-iterate:
I have one router that is 10.1.1.1 and gives out DHCP 10.1.1.*
and the other router 192.168.0.1 that gives out DHCP 192.168.0.*.
I would like to leave these address spaces alone and define a new
on 10.30.1.* that computer from both networks can participate in
effectively forming a new virtual LAN.
Is this possible with tinc? I know this possible with other
software, I'm just having hard time figuring out if this is
something I can configure tinc to do.
Andrew
_______________________________________________
tinc mailing list
[email protected]
http://www.tinc-vpn.org/cgi-bin/mailman/listinfo/tinc
