Hi, I have never used Cygwin (only Linux), but make sure that you are not using your serial port e.g. Serial Forwarder, PrintClient, Listen, etc. You can't use them and program at the same time.
Arik On Wed, Mar 3, 2010 at 17:29, Isabelle Hang < [email protected]> wrote: > Hi all, > > I use Cygwin on Windows XP, a mib520 and a micaz mote. (I am quite > new, so do you need further information?) > It was all working fine and I was able to program the motes. > But suddenly I get the following error, if I try to install a program > on a mote: > > > $make micaz install mib510./dev/ttyS2 > mkdir -p build/micaz > ..... > ..... > ..... > writing TOS image > cp build/micaz/main.srec build/micaz/main.srec.out > installing micaz binary using mib510 > uisp -dprog=mib510 -dserial=/dev/ttyS2 --wr_fuse_h=0xd9 > -dpart=ATmega128 --wr_fuse_e=ff --erase --upload > if=build/micaz/main.srec.out > Firmware Version: . > Failed to enter programming mode. > make: *** [program] Error 2 > > I have looked in the mailinglist, but there was no proper solution for > this problem. > Please can you help me? I have no idea how to fix this problem. > > Best regards, > Isa > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > -- Best Regards, Arik Sapojnik
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
