Did you move the USB cable to a different port? Widows seems to like to re-assign COM port numbers based on where they are connected. You might try looking in the Device Manager under "Ports" to see if it has any enlightening details.
On the subject of Motelist. It only works with telos type devices. The micas don't respond to USB inquiries. MS Isabelle Hang wrote: > Hi all, > > I use Cygwin on Windows XP, a mib520 and a micaz mote. (I am quite > new, so do you need further information?) > It was all working fine and I was able to program the motes. > But suddenly I get the following error, if I try to install a program > on a mote: > > > $make micaz install mib510./dev/ttyS2 > mkdir -p build/micaz > ..... > ..... > ..... > writing TOS image > cp build/micaz/main.srec build/micaz/main.srec.out > installing micaz binary using mib510 > uisp -dprog=mib510 -dserial=/dev/ttyS2 --wr_fuse_h=0xd9 > -dpart=ATmega128 --wr_fuse_e=ff --erase --upload > if=build/micaz/main.srec.out > Firmware Version: . > Failed to enter programming mode. > make: *** [program] Error 2 > > I have looked in the mailinglist, but there was no proper solution for > this problem. > Please can you help me? I have no idea how to fix this problem. > > Best regards, > Isa > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
