I recently purchased a second TiVo and decided to put it on
my network so that I could transfer content between my two TiVos. I
ordered a Linksys USB200M Version 2 USB to Ethernet adapter from the
TiVo web site and connected it to my TiVo. The network test and
manual connection to the TiVo service works fine however after being
connected for about 24 hours the TiVo can no longer talk to the
network, the status says that there was a failure while configuring.
If I unplug the USB connector and plug it back in my network
connection comes back to life. I have moved the adapter to the second
USB connection on my TiVo and also tried the second TiVo with the same results.
Is anyone else using this adapter? Do you have the same
problems? The documentation says that I need version 7.2.2 of the
TiVo software to use this adapter, I have the correct version on both
TiVos. Since this requires the latest version of the TiVo software I
am wondering if there is a problem with the drivers.
Ken G.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/tivocentral/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
