I have a USB 2.0 device that seems to get confused when plugged into
a USB port. There are times when it seems to think that the port is a
USB 1.1 port and will stop talking to the port. Re-plugging in the
connector seems to reestablish the port as a USB 2.0 port for the
device. I am plugging into a PCI card with other USB 1.1 devices, so
I am not sure if that is part of the issue.
On Mar 31, 2006, at 11:20 PM, Ken Gunther wrote:
> I recently purchased a second TiVo and decided to put it on
> my network so that I could transfer content between my two TiVos. I
> ordered a Linksys USB200M Version 2 USB to Ethernet adapter from the
> TiVo web site and connected it to my TiVo. The network test and
> manual connection to the TiVo service works fine however after being
> connected for about 24 hours the TiVo can no longer talk to the
> network, the status says that there was a failure while configuring.
> If I unplug the USB connector and plug it back in my network
> connection comes back to life. I have moved the adapter to the second
> USB connection on my TiVo and also tried the second TiVo with the
> same results.
>
> Is anyone else using this adapter? Do you have the same
> problems? The documentation says that I need version 7.2.2 of the
> TiVo software to use this adapter, I have the correct version on both
> TiVos. Since this requires the latest version of the TiVo software I
> am wondering if there is a problem with the drivers.
>
>
> Ken G.
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/tivocentral/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
