goopie;570806 Wrote: > I installed Soundcheck's software mods and when I power up the Touch it > won't connect to my network. So, reading through the posts I found the > problem - I connect via wireless and the mod shuts down the wireless > module. I have to connect wirelessly. I live in an apartment and don't > want to run an ethernet cable from my office to the living area as it > would mean drilling though some solid walls etc. > > So, can the script be modified to keep the wireless module active and > would that then completely negate any improvement in sound quality? > Does wireless have such a drastic effect on the sound?
No it doesn't a far as I (and many others) are concerned. You cannot apply the RCS.local mod if running wi-fi - you would have to edit the file to skip that aspect of the mod. You can still apply he asound.conf mod if you are only using an external DAC. I didn't find that made any difference either, but you should try it for yourself. Of course, first you need to undo the mod, for which you will need to connect via an ethernet cable temporarily... -- Phil Leigh You want to see the signal path BEFORE it gets onto a CD/vinyl...it ain't what you'd call minimal... Touch(wired/XP) - TACT 2.2X (Linear PSU) + Good Vibrations S/W - MF Triplethreat(Audiocom full mods) - Linn 5103 - Aktiv 5.1 system (6x LK140's, ESPEK/TRIKAN/KATAN/SEIZMIK 10.5), Townsend Supertweeters, Blue Jeans Digital,Kimber Speaker & Chord Interconnect cables Kitchen Boom, Outdoors: SB Radio ------------------------------------------------------------------------ Phil Leigh's Profile: http://forums.slimdevices.com/member.php?userid=85 View this thread: http://forums.slimdevices.com/showthread.php?t=79857 _______________________________________________ Touch mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/touch
