guidof wrote: > I have a Benchmark DAC 2 D, fed by a Squeezebox Touch with the EDO > extender. When used in coax mode, the DAC automatically switches to the > appropriate resolution, depending on what comes down the pike. Not > always so when used in USB mode. When that happens, I need to cycle the > DAC through a USB 1.0 connection, and then back to USB 2.0, sometimes > several times before it will lock onto the correct resolution. This > happens both with and without an Uptone Regen in the chain. A real PITA > as the USB tends to sound better than the coax in my system. Any idea or > help to solve this problem will be greatly appreciated. > > Guido F.
Hi I just received my Regen today. Very pleased with the sound so far (just a couple of hours playing) I am currently using it between Jplay6 on a Intel NUC and my Devialet 250 amp, but I plan to try the same combination as you have with a Touch. Unfortunately I do not think I have a definite solution to your problem with sample rate switching other than suggest you try the mod for the Touch I describe here: http://devialetchat.com/showthread.php?tid=208 You have obviously done part one already as you have EDO running, but there is a small chance squeezelite is better at switching sample rates on the USB output so Part two might be worth a try Readynas Ultra 2 Plus - LMS 7.8 with BrutefirDRC 2.0 - filter from Audiolense 4.6 - Touch (EDO) - Stello U3 USB-AES/EBU to Devialet D-Premier - KEF Q300 (redesigned filter) ------------------------------------------------------------------------ OGS's Profile: http://forums.slimdevices.com/member.php?userid=32981 View this thread: http://forums.slimdevices.com/showthread.php?t=94512 _______________________________________________ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
