Steve, Be careful. In both the US and Europe, it is required to evaluate the power output of the E-LEDs juast as you would for lasers.
John A. Juhasz Product Qualification & Compliance Engr. Fiber Options, Inc. 80 Orville Dr. Suite 102 Bohemia, NY 11716 USA Tel: 516-567-8320 ext. 24 Fax: 516-567-8322 -----Original Message----- From: Steve Grobe [mailto:[email protected]] Sent: Thursday, February 18, 1999 8:05 AM To: '[email protected]' Subject: RE: T1/E1 equipment We are not planning to use any at this time ELEDs will probably be used to drive the single mode. > -----Original Message----- > From: Douglas McKean [SMTP:[email protected]] > Sent: Wednesday, February 17, 1999 3:29 PM > To: [email protected]; [email protected] > Subject: RE: T1/E1 equipment > Importance: High > > > How about any lasers, Steve? > > Regards, Doug > > At 09:38 AM 2/17/99 -0600, Steve Grobe wrote: > >I have already had one response asking where we intend > >to sell the product, I know I should have thought of that. > > > >To start with the product would market to the U.S. and > >Europe. The product will convert signals on the copper > >interface (RJ-45 or coax) to either multimode or single > >mode fiber for longer runs.
