Hello reuben. Just came back from a series of tests. Will pay tomorrow proper attention to your E-mails.
Frank. At 08:34 AM 2/18/99 +1100, you wrote: >Steve, > >Even though you do not plan to sell your product in Australia and Zealand >at this time it would be wise and economical to have your Test house >include Australian National Deviations when doing the European safety >testing to EN60950. They can then issue a Test report to TS-001 & >AS/NZS3260 for little incremental cost. > >The European EMC report can usually be used in Australia. > >Telecom's testing to TS 016 is required. That can wait till you are ready >to enter the Australian market. > > > >Hope this helps. > >R Medding >R MEDDING & ASSOCIATES Consulting Engineers >EMAIL: [email protected]. FOR INTNL CALLS >Ph: 61-3-95328848 FAX: 61-3-95328849 > >---------- >| From: Steve Grobe <[email protected]> >| To: '[email protected]'; Emc-Pstc@Majordomo. Ieee. Org (E-mail) ><[email protected]> >| Subject: RE: T1/E1 equipment >| Date: Thursday, February 18, 1999 2:38 AM >| >| I have already had one response asking where we intend >| to sell the product, I know I should have thought of that. >| >| To start with the product would market to the U.S. and >| Europe. The product will convert signals on the copper >| interface (RJ-45 or coax) to either multimode or single >| mode fiber for longer runs. >| >| > -----Original Message----- >| > From: Steve Grobe [SMTP:[email protected]] >| > Sent: Wednesday, February 17, 1999 8:57 AM >| > To: Emc-Pstc@Majordomo. Ieee. Org (E-mail); Treg@World. Std. Com >| > (E-mail) >| > Subject: T1/E1 equipment >| > >| > The company I work for is considering designing >| > a T1/E1 product that would be used for customer >| > or telco inside lines. I have very little (no) experience >| > with this type product and I am wondering what >| > standards apply. I need to know what documents >| > to purchase. >| > >| > >| > Thanks in advance for your time. >| > >| > Steve >
