Hi, Bill A Happy New Year, for first.
I am willing to help you in your needs. I could calculate the lenghts of the arms, provided that you inform me the dimensions specified in the included sketch. Should you want to receive my calculations, please send the dimensions required (d<--->d=distance between center of holes of scalar plate, h = height of scalar plate, dia = diameter of dish between edge holes matching one end of arm, depth=depth of dish.. Having those dimensions, I will be able to determine the focal distance and, therefore, I could determine the exact dimensions of arms (using AUTOCAD designing tools). Best regards. Loures/Macei[o/Al/Brazil visit www.bandaku.com.br ----- Original Message ----- From: ocsrc1 To: [email protected] Sent: Monday, December 31, 2007 3:25 AM Hello Group, I have a 5 foot dish I am trying to put back together. I have not been able to find the support arms that attach the feedhorn to the dish. There were 4 of them spaced equally apart. I am trying to find the length of these arms to re-make them. They had 45 degree bends on both ends that were flat to allow bolting to the feedhorm and the other end bolted to the outer edge of the dish. If you have one of these 5 foot dishes I would really appriciate it if you could measure the length of the main support and the length of the 2 bends. Also, if you know the diam. of the supports that would be great as well. I think they were 1/2" or 3/4" diam. Thanks in advance. Bill KC2OVX [Non-text portions of this message have been removed]
