The dish is 59" wide and 10" deep. Hope this helps
Bill --- In [email protected], "Geraldo Paiva" <[EMAIL PROTECTED]> wrote: > > Considering the attachments is being stripped away by Yahoo, please see the two dimensions I need: dia of dish and depth of dish. > > > !------------------ dia of dish ------------------! > ...................................................... ---- > .......................!..................... > ..................!.............. HOW DEEP IS DISH > ............!......... > ....!.... ----- > > > ----- Original Message ----- > From: Richard A. Keirstead > To: [email protected] > Sent: Tuesday, January 01, 2008 4:36 PM > Subject: Re: [TVRO] Re: Need help with measurement on 5 foot dish support arms > > > Yahoo Groups strips away all attachments. You will need to send the > sketches direct to the other person instead of via Groups. > RAK > > Geraldo Paiva wrote: > > > I tryed three times to send the sketch. Certainly, Yahoogroups is > > blocking the attached sketch, I see. > > > > You have already furnished the distanCe between holes of feedhorn ring > > (5.3/4"). Ring deep 1'. OK. tHe opening of the feedhorn extends down > > 3/4" from the bottom of the ring. OK. > > > > Are missing > > > > DIAM > > <------------------------------------------------------> ------- > > . . ! > > . . ! > > . . ! DEPTH > > . . ! > > . . ! > > . ------- > > > > Loures > > > > > > > > > > > > > > > > > > > [Non-text portions of this message have been removed] >
