On Fri, 2014-07-18 at 19:22 +0300, Siarhei Siamashka wrote: > The RESET pin needs to be kept low for at least 200 us according > to the DDR3 spec. So just do it the right way. > > This issue did not cause any visible major problems earlier, because > the DRAM RESET pin is usually already low after the board reset. And > the time gap before reaching the sunxi u-boot DRAM initialization > code appeared to be sufficient. > > Signed-off-by: Siarhei Siamashka <[email protected]>
Acked-by: Ian Campbell <[email protected]> _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
