On 09/07/2016 03:08 AM, Gong Qianyu wrote:
> Hi all,
> This is version 6 patchset mainly to add support for both LS1046ARDB&QDS
> It should be based on two DDR patches to work well on LS1046ARDB or
> The two patches are:
> PCIe, USB and lpuart are not supported yet due to lack of some driver patches
> and I'll send them to upstream once they're ready.
> Please help to review. Thanks very much!
> Changes in v6:
> - Remove lpuart support for QDS board.
> - Move CONFIG_FSL_QSPI to defconfig and select DM_SPI_FLASH in Kconfig.
> Changes in v5:
> - Add a new patch to remove BSS clearing and board_init_r in spl.c.
> - Fix SPL_PAD_TO size to block aligned value for NAND boot.
> - Adjust the SPL BSS and MALLOC address for future use.
> Changes in v4:
> - Extend SPL max size and pad_to size for SD boot.
> - Add LS1046AQDS board support patch.
> Changes in v3:
> - Remove redundant sd rcw .cfg files.
> - Adjust the format of memory map in readme.
> - Add emmc boot support.
> Changes in v2:
> - Add ERRATUM_A008511.
> - Use values directly instead of macros for SATA ECC.
> - Add >60 characters' paragraph for the board help.
> - Fix the memory map in readme.
> - Remove unused flash r/w functions.
> - Remove DDR3 defines.
> - Revise some commit messages.
> Gong Qianyu (1):
> armv8: fsl-layerscape: spl: remove BSS clearing and board_init_r
> Mingkai Hu (2):
> armv8: fsl-layerscape: Increase L2 Data RAM latency and L2 Tag RAM
> armv8: ls1046ardb: Add LS1046ARDB board support
> Shaohui Xie (5):
> ddr: fsl: fix a compile issue
> Export memset for standalone AQ FW load apps
> armv8: fsl-layerscape: add define CONFIG_STANDALONE_LOAD_ADDR for
> standalone app
> armv8: ls1046a: disable SATA ECC in DCSR
> armv8: ls1046aqds: Add LS1046AQDS board support
> Shengzhou Liu (1):
> armv8: ls1046a: Enable DDR erratum for ls1046a
This set has been applied to fsl-qoriq master. Awaiting upstream. Thanks.
U-Boot mailing list