PRM_VC_I2C_CHANNEL_FREQ_KHZ is defined in omap5/clock.h but isn't really related to clocks.
Since it's only used by mach-omap2/vc.c, move its definition there. Signed-off-by: Bastien Curutchet <[email protected]> --- arch/arm/include/asm/arch-omap5/clock.h | 3 --- arch/arm/mach-omap2/vc.c | 2 ++ 2 files changed, 2 insertions(+), 3 deletions(-) diff --git a/arch/arm/include/asm/arch-omap5/clock.h b/arch/arm/include/asm/arch-omap5/clock.h index eeb3c6f2a6c..aaa5e573115 100644 --- a/arch/arm/include/asm/arch-omap5/clock.h +++ b/arch/arm/include/asm/arch-omap5/clock.h @@ -204,9 +204,6 @@ /* Clock frequencies */ #define OMAP_SYS_CLK_IND_38_4_MHZ 6 -/* PRM_VC_VAL_BYPASS */ -#define PRM_VC_I2C_CHANNEL_FREQ_KHZ 400 - /* CTRL_CORE_SRCOMP_NORTH_SIDE */ #define USB2PHY_DISCHGDET (1 << 29) #define USB2PHY_AUTORESUME_EN (1 << 30) diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index cb377aa1272..92d2682a3f2 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -46,6 +46,8 @@ #define PRM_VC_VAL_BYPASS_DATA_SHIFT 16 #define PRM_VC_VAL_BYPASS_DATA_MASK 0xFF +#define PRM_VC_I2C_CHANNEL_FREQ_KHZ 400 + /** * omap_vc_init() - Initialization for Voltage controller * @speed_khz: I2C buspeed in KHz -- 2.54.0
