Lots of clock definitions are common to OMAP3, OMAP4 and OMAP5. So the same macros are defined both in arch-am33xx/clock.h and in arch-omap5/clock.h. Upcoming support for OMAP4 will again need the same macros.
Group these common macro definitions into a common omap_clock header shared across the OMAP2+ families. Signed-off-by: Bastien Curutchet <[email protected]> --- arch/arm/include/asm/arch-am33xx/clock.h | 43 +---------- arch/arm/include/asm/arch-omap5/clock.h | 101 +----------------------- arch/arm/include/asm/ti-common/omap_clock.h | 114 ++++++++++++++++++++++++++++ 3 files changed, 117 insertions(+), 141 deletions(-) diff --git a/arch/arm/include/asm/arch-am33xx/clock.h b/arch/arm/include/asm/arch-am33xx/clock.h index 13960db2fbd..80b0707131f 100644 --- a/arch/arm/include/asm/arch-am33xx/clock.h +++ b/arch/arm/include/asm/arch-am33xx/clock.h @@ -12,31 +12,10 @@ #include <asm/arch/clocks_am33xx.h> #include <asm/arch/hardware.h> +#include <asm/ti-common/omap_clock.h> #define LDELAY 1000000 -/*CM_<clock_domain>__CLKCTRL */ -#define CD_CLKCTRL_CLKTRCTRL_SHIFT 0 -#define CD_CLKCTRL_CLKTRCTRL_MASK 3 - -#define CD_CLKCTRL_CLKTRCTRL_NO_SLEEP 0 -#define CD_CLKCTRL_CLKTRCTRL_SW_SLEEP 1 -#define CD_CLKCTRL_CLKTRCTRL_SW_WKUP 2 - -/* CM_<clock_domain>_<module>_CLKCTRL */ -#define MODULE_CLKCTRL_MODULEMODE_SHIFT 0 -#define MODULE_CLKCTRL_MODULEMODE_MASK 3 -#define MODULE_CLKCTRL_IDLEST_SHIFT 16 -#define MODULE_CLKCTRL_IDLEST_MASK (3 << 16) - -#define MODULE_CLKCTRL_MODULEMODE_SW_DISABLE 0 -#define MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN 2 - -#define MODULE_CLKCTRL_IDLEST_FULLY_FUNCTIONAL 0 -#define MODULE_CLKCTRL_IDLEST_TRANSITIONING 1 -#define MODULE_CLKCTRL_IDLEST_IDLE 2 -#define MODULE_CLKCTRL_IDLEST_DISABLED 3 - /* CM_CLKMODE_DPLL */ #define CM_CLKMODE_DPLL_SSC_EN_SHIFT 12 #define CM_CLKMODE_DPLL_SSC_EN_MASK (1 << 12) @@ -53,26 +32,6 @@ #define CM_CLKMODE_DPLL_DRIFTGUARD_EN_MASK (1 << 8) #define CM_CLKMODE_DPLL_RAMP_RATE_SHIFT 5 #define CM_CLKMODE_DPLL_RAMP_RATE_MASK (0x7 << 5) -#define CM_CLKMODE_DPLL_EN_SHIFT 0 -#define CM_CLKMODE_DPLL_EN_MASK (0x7 << 0) - -#define CM_CLKMODE_DPLL_DPLL_EN_SHIFT 0 -#define CM_CLKMODE_DPLL_DPLL_EN_MASK 7 - -#define DPLL_EN_STOP 1 -#define DPLL_EN_MN_BYPASS 4 -#define DPLL_EN_LOW_POWER_BYPASS 5 -#define DPLL_EN_FAST_RELOCK_BYPASS 6 -#define DPLL_EN_LOCK 7 - -/* CM_IDLEST_DPLL fields */ -#define ST_DPLL_CLK_MASK 1 - -/* CM_CLKSEL_DPLL */ -#define CM_CLKSEL_DPLL_M_SHIFT 8 -#define CM_CLKSEL_DPLL_M_MASK (0x7FF << 8) -#define CM_CLKSEL_DPLL_N_SHIFT 0 -#define CM_CLKSEL_DPLL_N_MASK 0x7F /* CM_SSC_DELTAM_DPLL */ #define CM_SSC_DELTAM_DPLL_FRAC_SHIFT 0 diff --git a/arch/arm/include/asm/arch-omap5/clock.h b/arch/arm/include/asm/arch-omap5/clock.h index aaa5e573115..02dcc0e4356 100644 --- a/arch/arm/include/asm/arch-omap5/clock.h +++ b/arch/arm/include/asm/arch-omap5/clock.h @@ -9,6 +9,8 @@ #ifndef _CLOCKS_OMAP5_H_ #define _CLOCKS_OMAP5_H_ +#include <asm/ti-common/omap_clock.h> + /* * Assuming a maximum of 1.5 GHz ARM speed and a minimum of 2 cycles per * loop, allow for a minimum of 2 ms wait (in reality the wait will be @@ -19,7 +21,6 @@ /* CM_DLL_CTRL */ #define CM_DLL_CTRL_OVERRIDE_SHIFT 0 #define CM_DLL_CTRL_OVERRIDE_MASK (1 << 0) -#define CM_DLL_CTRL_NO_OVERRIDE 0 /* CM_CLKMODE_DPLL */ #define CM_CLKMODE_DPLL_REGM4XEN_SHIFT 11 @@ -32,20 +33,6 @@ #define CM_CLKMODE_DPLL_DRIFTGUARD_EN_MASK (1 << 8) #define CM_CLKMODE_DPLL_RAMP_RATE_SHIFT 5 #define CM_CLKMODE_DPLL_RAMP_RATE_MASK (0x7 << 5) -#define CM_CLKMODE_DPLL_EN_SHIFT 0 -#define CM_CLKMODE_DPLL_EN_MASK (0x7 << 0) - -#define CM_CLKMODE_DPLL_DPLL_EN_SHIFT 0 -#define CM_CLKMODE_DPLL_DPLL_EN_MASK 7 - -#define DPLL_EN_STOP 1 -#define DPLL_EN_MN_BYPASS 4 -#define DPLL_EN_LOW_POWER_BYPASS 5 -#define DPLL_EN_FAST_RELOCK_BYPASS 6 -#define DPLL_EN_LOCK 7 - -/* CM_IDLEST_DPLL fields */ -#define ST_DPLL_CLK_MASK 1 /* SGX */ #define CLKSEL_GPU_HYD_GCLK_MASK (1 << 25) @@ -54,24 +41,6 @@ /* CM_CLKSEL_DPLL */ #define CM_CLKSEL_DPLL_DPLL_SD_DIV_SHIFT 24 #define CM_CLKSEL_DPLL_DPLL_SD_DIV_MASK (0xFF << 24) -#define CM_CLKSEL_DPLL_M_SHIFT 8 -#define CM_CLKSEL_DPLL_M_MASK (0x7FF << 8) -#define CM_CLKSEL_DPLL_N_SHIFT 0 -#define CM_CLKSEL_DPLL_N_MASK 0x7F -#define CM_CLKSEL_DCC_EN_SHIFT 22 -#define CM_CLKSEL_DCC_EN_MASK (1 << 22) - -/* CM_SYS_CLKSEL */ -#define CM_SYS_CLKSEL_SYS_CLKSEL_MASK 7 - -/* CM_CLKSEL_CORE */ -#define CLKSEL_CORE_SHIFT 0 -#define CLKSEL_L3_SHIFT 4 -#define CLKSEL_L4_SHIFT 8 - -#define CLKSEL_CORE_X2_DIV_1 0 -#define CLKSEL_L3_CORE_DIV_2 1 -#define CLKSEL_L4_L3_DIV_2 1 /* CM_ABE_PLL_REF_CLKSEL */ #define CM_ABE_PLL_REF_CLKSEL_CLKSEL_SHIFT 0 @@ -91,57 +60,12 @@ #define DPLL_IVA_CLKSEL_CORE_X2_DIV_2 1 -/* CM_SHADOW_FREQ_CONFIG1 */ -#define SHADOW_FREQ_CONFIG1_FREQ_UPDATE_MASK 1 -#define SHADOW_FREQ_CONFIG1_DLL_OVERRIDE_MASK 4 -#define SHADOW_FREQ_CONFIG1_DLL_RESET_MASK 8 - -#define SHADOW_FREQ_CONFIG1_DPLL_EN_SHIFT 8 -#define SHADOW_FREQ_CONFIG1_DPLL_EN_MASK (7 << 8) - -#define SHADOW_FREQ_CONFIG1_M2_DIV_SHIFT 11 -#define SHADOW_FREQ_CONFIG1_M2_DIV_MASK (0x1F << 11) - -/*CM_<clock_domain>__CLKCTRL */ -#define CD_CLKCTRL_CLKTRCTRL_SHIFT 0 -#define CD_CLKCTRL_CLKTRCTRL_MASK 3 - -#define CD_CLKCTRL_CLKTRCTRL_NO_SLEEP 0 -#define CD_CLKCTRL_CLKTRCTRL_SW_SLEEP 1 -#define CD_CLKCTRL_CLKTRCTRL_SW_WKUP 2 -#define CD_CLKCTRL_CLKTRCTRL_HW_AUTO 3 - -/* CM_<clock_domain>_<module>_CLKCTRL */ -#define MODULE_CLKCTRL_MODULEMODE_SHIFT 0 -#define MODULE_CLKCTRL_MODULEMODE_MASK 3 -#define MODULE_CLKCTRL_IDLEST_SHIFT 16 -#define MODULE_CLKCTRL_IDLEST_MASK (3 << 16) - -#define MODULE_CLKCTRL_MODULEMODE_SW_DISABLE 0 -#define MODULE_CLKCTRL_MODULEMODE_HW_AUTO 1 -#define MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN 2 - -#define MODULE_CLKCTRL_IDLEST_FULLY_FUNCTIONAL 0 -#define MODULE_CLKCTRL_IDLEST_TRANSITIONING 1 -#define MODULE_CLKCTRL_IDLEST_IDLE 2 -#define MODULE_CLKCTRL_IDLEST_DISABLED 3 - -/* CM_L4PER_GPIO4_CLKCTRL */ -#define GPIO4_CLKCTRL_OPTFCLKEN_MASK (1 << 8) - -/* CM_L3INIT_HSMMCn_CLKCTRL */ -#define HSMMC_CLKCTRL_CLKSEL_MASK (1 << 24) -#define HSMMC_CLKCTRL_CLKSEL_DIV_MASK (3 << 25) - /* CM_IPU1_IPU1_CLKCTRL CLKSEL MASK */ #define IPU1_CLKCTRL_CLKSEL_MASK BIT(24) /* CM_L3INIT_SATA_CLKCTRL */ #define SATA_CLKCTRL_OPTFCLKEN_MASK (1 << 8) -/* CM_WKUP_GPTIMER1_CLKCTRL */ -#define GPTIMER1_CLKCTRL_CLKSEL_MASK (1 << 24) - /* CM_CAM_ISS_CLKCTRL */ #define ISS_CLKCTRL_OPTFCLKEN_MASK (1 << 8) @@ -181,12 +105,6 @@ /* CM_L3INIT_OCP2SCP1_CLKCTRL */ #define OCP2SCP1_CLKCTRL_MODULEMODE_HW (1 << 0) -/* CM_MPU_MPU_CLKCTRL */ -#define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_SHIFT 24 -#define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_MASK (3 << 24) -#define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_SHIFT 26 -#define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK (1 << 26) - /* CM_WKUPAON_SCRM_CLKCTRL */ #define OPTFCLKEN_SCRM_PER_SHIFT 9 #define OPTFCLKEN_SCRM_PER_MASK (1 << 9) @@ -201,9 +119,6 @@ #define RSTTIME1_SHIFT 0 #define RSTTIME1_MASK (0x3ff << 0) -/* Clock frequencies */ -#define OMAP_SYS_CLK_IND_38_4_MHZ 6 - /* CTRL_CORE_SRCOMP_NORTH_SIDE */ #define USB2PHY_DISCHGDET (1 << 29) #define USB2PHY_AUTORESUME_EN (1 << 30) @@ -399,16 +314,4 @@ /* CKO buffer control */ #define CKOBUFFER_CLK_ENABLE_MASK (1 << 28) -/* AUXCLKx reg fields */ -#define AUXCLK_ENABLE_MASK (1 << 8) -#define AUXCLK_SRCSELECT_SHIFT 1 -#define AUXCLK_SRCSELECT_MASK (3 << 1) -#define AUXCLK_CLKDIV_SHIFT 16 -#define AUXCLK_CLKDIV_MASK (0xF << 16) - -#define AUXCLK_SRCSELECT_SYS_CLK 0 -#define AUXCLK_SRCSELECT_CORE_DPLL 1 -#define AUXCLK_SRCSELECT_PER_DPLL 2 -#define AUXCLK_SRCSELECT_ALTERNATE 3 - #endif /* _CLOCKS_OMAP5_H_ */ diff --git a/arch/arm/include/asm/ti-common/omap_clock.h b/arch/arm/include/asm/ti-common/omap_clock.h new file mode 100644 index 00000000000..4a37b0bc8c3 --- /dev/null +++ b/arch/arm/include/asm/ti-common/omap_clock.h @@ -0,0 +1,114 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +#ifndef _OMAP_CLOCK_H_ +#define _OMAP_CLOCK_H_ + +/* CM_CLKMODE_DPLL */ +#define CM_CLKMODE_DPLL_EN_SHIFT 0 +#define CM_CLKMODE_DPLL_EN_MASK (0x7 << 0) + +#define CM_CLKMODE_DPLL_DPLL_EN_SHIFT 0 +#define CM_CLKMODE_DPLL_DPLL_EN_MASK 7 + +#define DPLL_EN_STOP 1 +#define DPLL_EN_MN_BYPASS 4 +#define DPLL_EN_LOW_POWER_BYPASS 5 +#define DPLL_EN_FAST_RELOCK_BYPASS 6 +#define DPLL_EN_LOCK 7 + +#define DPLL_NO_LOCK 0 +#define DPLL_LOCK 1 + +/* CM_IDLEST_DPLL fields */ +#define ST_DPLL_CLK_MASK 1 + +/* CM_CLKSEL_CORE */ +#define CLKSEL_CORE_SHIFT 0 +#define CLKSEL_L3_SHIFT 4 +#define CLKSEL_L4_SHIFT 8 + +/* CM_DLL_CTRL */ +#define CM_DLL_CTRL_NO_OVERRIDE 0 + +/* CM_CLKSEL_DPLL */ +#define CM_CLKSEL_DPLL_N_SHIFT 0 +#define CM_CLKSEL_DPLL_N_MASK 0x7F +#define CM_CLKSEL_DPLL_M_SHIFT 8 +#define CM_CLKSEL_DPLL_M_MASK (0x7FF << 8) +#define CM_CLKSEL_DCC_EN_SHIFT 22 +#define CM_CLKSEL_DCC_EN_MASK BIT(22) + +#define CLKSEL_CORE_X2_DIV_1 0 +#define CLKSEL_L3_CORE_DIV_2 1 +#define CLKSEL_L4_L3_DIV_2 1 + +/* CM_SYS_CLKSEL */ +#define CM_SYS_CLKSEL_SYS_CLKSEL_MASK 7 + +/*CM_<clock_domain>__CLKCTRL */ +#define CD_CLKCTRL_CLKTRCTRL_SHIFT 0 +#define CD_CLKCTRL_CLKTRCTRL_MASK 3 + +#define CD_CLKCTRL_CLKTRCTRL_NO_SLEEP 0 +#define CD_CLKCTRL_CLKTRCTRL_SW_SLEEP 1 +#define CD_CLKCTRL_CLKTRCTRL_SW_WKUP 2 +#define CD_CLKCTRL_CLKTRCTRL_HW_AUTO 3 + +/* CM_SHADOW_FREQ_CONFIG1 */ +#define SHADOW_FREQ_CONFIG1_FREQ_UPDATE_MASK 1 +#define SHADOW_FREQ_CONFIG1_DLL_OVERRIDE_MASK 4 +#define SHADOW_FREQ_CONFIG1_DLL_RESET_MASK 8 + +#define SHADOW_FREQ_CONFIG1_DPLL_EN_SHIFT 8 +#define SHADOW_FREQ_CONFIG1_DPLL_EN_MASK (7 << 8) + +#define SHADOW_FREQ_CONFIG1_M2_DIV_SHIFT 11 +#define SHADOW_FREQ_CONFIG1_M2_DIV_MASK (0x1F << 11) + +/* CM_<clock_domain>_<module>_CLKCTRL */ +#define MODULE_CLKCTRL_MODULEMODE_SHIFT 0 +#define MODULE_CLKCTRL_MODULEMODE_MASK 3 +#define MODULE_CLKCTRL_IDLEST_SHIFT 16 +#define MODULE_CLKCTRL_IDLEST_MASK (3 << 16) + +#define MODULE_CLKCTRL_MODULEMODE_SW_DISABLE 0 +#define MODULE_CLKCTRL_MODULEMODE_HW_AUTO 1 +#define MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN 2 + +#define MODULE_CLKCTRL_IDLEST_FULLY_FUNCTIONAL 0 +#define MODULE_CLKCTRL_IDLEST_TRANSITIONING 1 +#define MODULE_CLKCTRL_IDLEST_IDLE 2 +#define MODULE_CLKCTRL_IDLEST_DISABLED 3 + +/* CM_L4PER_GPIO4_CLKCTRL */ +#define GPIO4_CLKCTRL_OPTFCLKEN_MASK BIT(8) + +/* CM_WKUP_GPTIMER1_CLKCTRL */ +#define GPTIMER1_CLKCTRL_CLKSEL_MASK BIT(24) + +/* CM_L3INIT_HSMMCn_CLKCTRL */ +#define HSMMC_CLKCTRL_CLKSEL_MASK BIT(24) +#define HSMMC_CLKCTRL_CLKSEL_DIV_MASK (3 << 25) + +/* Clock frequencies */ +#define OMAP_SYS_CLK_IND_38_4_MHZ 6 + +/* AUXCLKx reg fields */ +#define AUXCLK_ENABLE_MASK BIT(8) +#define AUXCLK_SRCSELECT_SHIFT 1 +#define AUXCLK_SRCSELECT_MASK (3 << 1) +#define AUXCLK_CLKDIV_SHIFT 16 +#define AUXCLK_CLKDIV_MASK (0xF << 16) +#define AUXCLK_CLKDIV_2 1 + +#define AUXCLK_SRCSELECT_SYS_CLK 0 +#define AUXCLK_SRCSELECT_CORE_DPLL 1 +#define AUXCLK_SRCSELECT_PER_DPLL 2 +#define AUXCLK_SRCSELECT_ALTERNATE 3 + +/* CM_MPU_MPU_CLKCTRL */ +#define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_SHIFT 24 +#define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_MASK (3 << 24) +#define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_SHIFT 26 +#define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK BIT(26) + +#endif /* _OMAP_CLOCK_H_ */ -- 2.54.0
