Make reset-rockchip available for use with dwc2 phy in SPL to load U-boot (full) from a USB disk.
Signed-off-by: Johan Jonker <[email protected]> --- drivers/reset/Kconfig | 9 +++++++++ drivers/reset/Makefile | 4 ++-- 2 files changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig index 66911199c8ba..10aa1ee9598b 100644 --- a/drivers/reset/Kconfig +++ b/drivers/reset/Kconfig @@ -100,6 +100,15 @@ config RESET_ROCKCHIP though is that some reset signals, like I2C or MISC reset multiple devices. +config SPL_RESET_ROCKCHIP + bool "Reset controller driver for Rockchip SoCs in SPL" + depends on SPL_DM_RESET && ARCH_ROCKCHIP && SPL_CLK + default n + help + Support for reset controller on rockchip SoC. The main limitation + though is that some reset signals, like I2C or MISC reset multiple + devices. + config RESET_HSDK bool "Synopsys HSDK Reset Driver" depends on DM_RESET && TARGET_HSDK diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile index 088545c64733..afb54b24ac95 100644 --- a/drivers/reset/Makefile +++ b/drivers/reset/Makefile @@ -3,7 +3,7 @@ # Copyright (c) 2016, NVIDIA CORPORATION. # -obj-$(CONFIG_DM_RESET) += reset-uclass.o +obj-$(CONFIG_$(PHASE_)DM_RESET) += reset-uclass.o obj-$(CONFIG_SANDBOX_MBOX) += sandbox-reset.o obj-$(CONFIG_SANDBOX_MBOX) += sandbox-reset-test.o obj-$(CONFIG_STI_RESET) += sti-reset.o @@ -16,7 +16,7 @@ obj-$(CONFIG_RESET_BCM6345) += reset-bcm6345.o obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o obj-$(CONFIG_RESET_AST2500) += reset-ast2500.o obj-$(CONFIG_RESET_AST2600) += reset-ast2600.o -obj-$(CONFIG_RESET_ROCKCHIP) += reset-rockchip.o rst-rk3506.o rst-rk3528.o rst-rk3576.o rst-rk3588.o +obj-$(CONFIG_$(PHASE_)RESET_ROCKCHIP) += reset-rockchip.o rst-rk3506.o rst-rk3528.o rst-rk3576.o rst-rk3588.o obj-$(CONFIG_RESET_MESON) += reset-meson.o obj-$(CONFIG_RESET_SOCFPGA) += reset-socfpga.o obj-$(CONFIG_RESET_MEDIATEK) += reset-mediatek.o -- 2.39.5
