Garth, did you see those performance improvements on the older CPE just by swapping the AP radio?
Chris Frost Director of Technology and Infrastructure Cruzio Internet 831.459.6301 x235 > On Dec 22, 2016, at 12:01 PM, G. Nicholas <[email protected]> wrote: > > Tyson, > > Yes, The AC Prism AP will outperform the original rocket by about 70% in our > opinion. We have been doing what you are asking about in our > Bloomington/Peoria market and the Prism's are great. We have both legacy M > series bridges and beams as well as new AC CPE and all are performing well. > We did have a few places where we also switched out the Sector Antennas to RF > 30deg horns which really lowered the noise floor. > > Garth > > ----- Original Message ----- > From: [email protected] <mailto:[email protected]> > Sent: 12/22/2016 1:42:33 PM > To: [email protected] <mailto:[email protected]> > Subject: Re: [Ubnt_users] Firmware Releases > >> This may be slightly off topic but only considering it because of peoples >> input on good performance of mixed ap mode on newer rocket prisms with the >> new firmwares. We have lots of 5.8 sectors with almost all nano beam m5s >> connected to them and have been wanting to migrate ac clients in the mix and >> upgrade the rockets aps to ac rocket prisms aps but waiting to pull that >> trigger until i saw some real world examples of mixed mode working well. So >> my question is if its lopsided and mostly just m5 beam clients and i migrate >> to ac clients as needed will the ac prism rockets aps perform just as well >> or better than our rocket ap m5s we currently have up? >> >> --------- Original Message --------- Subject: Re: [Ubnt_users] Firmware >> Releases >> From: [email protected] <mailto:[email protected]> >> Date: 12/22/16 2:17 pm >> To: "James Craig" <[email protected] <mailto:[email protected]>>, "Ubiquiti Users >> Group" <[email protected] <mailto:[email protected]>> >> >> James >> is there anything I have to be worried about before upgrading my network >> because I am still on 5.6.9 with powerbeams,nanostation,rocket m2/m5's. >> >> On 2016-12-22 14:14, James Craig via Ubnt_users wrote: >>> Hi Keith, >>> >>> Sending you an email for more details. >>> >>> Also, Were these stations mostly XM based stations that wouldn't >>> connect, or a mix? >>> >>> On Thu, Dec 22, 2016 at 1:33 PM, Keith Yoder <[email protected]> >>> wrote: >>> >>>> We updated about 1700 radios over the weekend. Yesterday afternoon >>>> we sent the APs back to 5.6.9 because our phones wouldn't stop >>>> ringing. Symptoms where bunches of CPEs not connected. A reboot of >>>> the AP usually fixed things but we can't be babysitting a hundred >>>> APs all day long. >>>> >>>> We had been testing the beta versions from about b15 on and hadn't >>>> really noticed this problem. We went from RC2 to the release >>>> version. (we skipped RC3) >>>> >>>> Keith Yoder >>>> >>>> 2016-12-22 15:27 GMT-03:00 Steve D <[email protected]>: >>>> >>>> Updating CPE first? Mike, you secretly started drinking the >>>> Ubuiquiti koolaid? You of all people are going to let them get away >>>> with shoddy QA? It's okay if new cpe are deployed one at a time are >>>> at or newer, but when doing a system wide upgrade, no f'n way. The >>>> damn things should be able to be newer or older and just connect and >>>> just work regardless. >>>> >>>> A stone-cold reliable updating process should be number one on their >>>> list. I just updated some scabby old canopy network we acquired a >>>> couple weeks ago from versions 6-10 years old and it just worked, no >>>> BS. Did the AP first. Then brought up a handful of CPE. Then the >>>> whole works. We don't even have addresses for all these locations >>>> so really didn't want to truck roll. But I trust that update >>>> system. >>>> >>>> A primary/secondary firmware loading system ought to get on their >>>> to-do list at the very least. If people can't trust the damn things >>>> to work without truck rolls, then people won't update firmware. >>>> Period. >>>> >>>> On Wed, Dec 21, 2016 at 12:09 PM, Mike Hammett >>>> <[email protected]> wrote: >>>> >>>> I think the clients should always be at equal or greater version >>>> than the AP, regardless of the platform. >>>> >>>> ----- >>>> Mike Hammett >>>> >>>> Intelligent Computing Solutions [1] >>>> [2] [3] [4] [5] >>>> >>>> Midwest Internet Exchange [6] >>>> [7] [8] [9] >>>> >>>> The Brothers WISP [10] >>>> [11] [12] >>>> >>>> ------------------------- >>>> >>>> FROM: "Rory Conaway" <[email protected] >>>> <mailto:[email protected]>> >>>> TO: "Ubiquiti Users Group" <[email protected] >>>> <mailto:[email protected]>> >>>> SENT: Wednesday, December 21, 2016 2:08:38 PM >>>> >>>> SUBJECT: Re: [Ubnt_users] Firmware Releases >>>> >>>> I just test it with an XM Rocket 5M. All clients on beta 15. 41 >>>> users online. After installation, 18 users came up. Went back to >>>> Beta, 41 users online again. I'm not sure if I have to make all the >>>> clients 6.0 first but I do know that this is exactly what we saw >>>> with RC3 and we had to go to a lot of houses to unload it when they >>>> wouldn't reconnect. We refer to that as hell week. >>>> >>>> Rory >>>> >>>> -----Original Message----- >>>> From: [email protected] <mailto:[email protected]> >>>> [mailto:[email protected] >>>> <mailto:[email protected]>] On Behalf Of Nick Bright >>>> Sent: Wednesday, December 21, 2016 10:08 AM >>>> To: [email protected] <mailto:[email protected]> >>>> Subject: Re: [Ubnt_users] Firmware Releases >>>> >>>> On 12/20/2016 9:43 AM, Kevin Lamothe wrote: >>>>> My experiences so far: >>>>> >>>>> 8.0 is stable >>>>> >>>>> 6.0 is stable running on 5GHz only. 2.4GHz and 900MHz AP/cpes will >>>> >>>>> randomly disconnect or goto sleep. Downgrading it back to 5.6.9 >>>> fixed >>>>> it for us. >>>>> >>>>> Ubiquiti is reviewing some support files I sent em. >>>> Remember kids: Just say no to dot-oh. :D >>>> >>>> -- >>>> ----------------------------------------------- >>>> - Nick Bright - >>>> - Vice President of Technology - >>>> - Valnet -=- We Connect You -=- - >>>> - Tel 888-332-1616 x 315 [13] / Fax 620-331-0789 [14] - >>>> - Web http://www.valnet.net/ <http://www.valnet.net/> - >>>> ----------------------------------------------- >>>> - Are your files safe? - >>>> - Valnet Vault - Secure Cloud Backup - >>>> - More information & 30 day free trial at - >>>> - http://www.valnet.net/services/valnet-vault >>>> <http://www.valnet.net/services/valnet-vault> [15] - >>>> ----------------------------------------------- >>>> >>>> This email message and any attachments are intended solely for the >>>> use of the addressees hereof. This message and any attachments may >>>> contain information that is confidential, privileged and exempt from >>>> disclosure under applicable law. If you are not the intended >>>> recipient of this message, you are prohibited from reading, >>>> disclosing, reproducing, distributing, disseminating or otherwise >>>> using this transmission. If you have received this message in error, >>>> please promptly notify the sender by reply E-mail and immediately >>>> delete this message from your system. >>>> >>>> _______________________________________________ >>>> Ubnt_users mailing list >>>> [email protected] <mailto:[email protected]> >>>> http://lists.wispa.org/mailman/listinfo/ubnt_users >>>> <http://lists.wispa.org/mailman/listinfo/ubnt_users> [16] >>>> _______________________________________________ >>>> Ubnt_users mailing list >>>> [email protected] <mailto:[email protected]> >>>> http://lists.wispa.org/mailman/listinfo/ubnt_users >>>> <http://lists.wispa.org/mailman/listinfo/ubnt_users> [16] >>>> >>>> _______________________________________________ >>>> Ubnt_users mailing list >>>> [email protected] <mailto:[email protected]> >>>> http://lists.wispa.org/mailman/listinfo/ubnt_users >>>> <http://lists.wispa.org/mailman/listinfo/ubnt_users> [16] >>>> >>>> _______________________________________________ >>>> Ubnt_users mailing list >>>> [email protected] <mailto:[email protected]> >>>> http://lists.wispa.org/mailman/listinfo/ubnt_users >>>> <http://lists.wispa.org/mailman/listinfo/ubnt_users> [16] >>> >>> _______________________________________________ >>> Ubnt_users mailing list >>> [email protected] <mailto:[email protected]> >>> http://lists.wispa.org/mailman/listinfo/ubnt_users >>> <http://lists.wispa.org/mailman/listinfo/ubnt_users> [16] >>> >>> >>> >>> Links: >>> ------ >>> [1] http://www.ics-il.com/ <http://www.ics-il.com/> >>> [2] https://www.facebook.com/ICSIL <https://www.facebook.com/ICSIL> >>> [3] https://plus.google.com/+IntelligentComputingSolutionsDeKalb >>> <https://plus.google.com/+IntelligentComputingSolutionsDeKalb> >>> [4] https://www.linkedin.com/company/intelligent-computing-solutions >>> <https://www.linkedin.com/company/intelligent-computing-solutions> >>> [5] https://twitter.com/ICSIL <https://twitter.com/ICSIL> >>> [6] http://www.midwest-ix.com/ <http://www.midwest-ix.com/> >>> [7] https://www.facebook.com/mdwestix <https://www.facebook.com/mdwestix> >>> [8] https://www.linkedin.com/company/midwest-internet-exchange >>> <https://www.linkedin.com/company/midwest-internet-exchange> >>> [9] https://twitter.com/mdwestix <https://twitter.com/mdwestix> >>> [10] http://www.thebrotherswisp.com/ <http://www.thebrotherswisp.com/> >>> [11] https://www.facebook.com/thebrotherswisp >>> <https://www.facebook.com/thebrotherswisp> >>> [12] https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg >>> <https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg> >>> [13] tel:(888)%20332-1616 >>> [14] tel:(620)%20331-0789 >>> [15] http://www.valnet.net/services/valnet-vault >>> <http://www.valnet.net/services/valnet-vault> >>> [16] http://lists.wispa.org/mailman/listinfo/ubnt_users >>> <http://lists.wispa.org/mailman/listinfo/ubnt_users> >>> _______________________________________________ >>> Ubnt_users mailing list >>> [email protected] >>> http://lists.wispa.org/mailman/listinfo/ubnt_users >> _______________________________________________ >> Ubnt_users mailing list >> [email protected] >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> > > _______________________________________________ > Ubnt_users mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/ubnt_users
_______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users
