It's far easier for a network device to limit its output than its input. When inputs are throttled, the upstream device may or may not listen to the requests (if such requests are even possible -- streaming UDP protocols come to mind).
On Tue, Aug 22, 2017 at 10:12 AM, Steve Barnes <[email protected]> wrote: > Sam Why only Egress? We use Egress and Ingress both and have no issue. > > > > *Steve Barnes* > > Wireless Operations Manager > > *New Lisbon Broadband* > > *NLBC.COM <http://NLBC.COM>* > > *PCSWIN.COM <http://PCSWIN.COM>* > > 765-584-2288 ext:1101 <(765)%20584-2288> > > > > *From:* [email protected] [mailto:[email protected]] > *On Behalf Of *Sam Tetherow > *Sent:* Tuesday, August 22, 2017 10:37 AM > *To:* [email protected] > > *Subject:* Re: [Ubnt_users] Erratic downloads and uploads, PBE-M5-400 > > > > Use egress only. LAN egress is download, WLAN egress is upload. > > > > On 08/22/2017 08:59 AM, Troy Gibson, Byhalia.net wrote: > > Steve, > > > > Thats a good idea to test. Never set one up on the CPE. I see the area > on the network tab, but not 100% how to set up and down limits on it. Is > there a protocol to use so the settings function correctly? > > > > Thanks, > > > > Troy > > > > > > > > Sent from my Verizon, Samsung Galaxy smartphone > > > > -------- Original message -------- > > From: Steve Barnes <[email protected]> <[email protected]> > > Date: 8/21/17 10:40 PM (GMT-05:00) > > To: Ubiquiti Users Group <[email protected]> <[email protected]> > > Subject: Re: [Ubnt_users] Erratic downloads and uploads, PBE-M5-400 > > > > Try taking the queue off the Mtik and settIng it on the cpe > > Steve Barnes > > -----Original Message----- > From: [email protected] [mailto:[email protected] > <[email protected]>] On Behalf Of [email protected] > Sent: Monday, August 21, 2017 2:33 PM > To: [email protected] > Subject: [Ubnt_users] Erratic downloads and uploads, PBE-M5-400 > > Time to ask the experts as I cannot figure out this issue!! This CPE > worked perfect until a recent storm, but I have replaced the AP and CPE > radios at this point too. > > I have one customer that reports erratic download and uploads. Actually > sometimes going above the set rate in my Tik router, CCR1009-7G-1C+PC, > Firmware Bugfix 6.38.7. This CPE is connected to an AP that is feed from > routers that are directly connected to my fiber line in my Data Center in > this area, so everything is at the base of the tower that feeds this AP > directly, no jumps to other towers first. > > I spent a lot of time connected to this CPE at the customers house testing > with and without airmax, changing radio firmware, decreasing and increasing > power, but get the same erratic behavior. I changed the POE, > M5 cone tested the cable (tested good), but still the same. I finally > tested multiple channels at the AP and found a stable solution/temp fix, > not perfect, but stable. I had to leave the CPE unlimited as it was still > not behaving correctly so for the trouble I left it unlimited to buy time > to figure this out. I even stopped at some other customers on that same > road and AP and those tested like it should at the rate it was set to in > the Tik router. > > Customer has been great during this time and sending me samples of > speedtests at different times in the day. Still getting big swings in > speeds that vary and when I check AirControl it does not even match the > speeds they are reporting. I'm using AC 2.1 beta 7. I realize the > unlimited setup could impact their tests, but why is AC2 not showing > anything even close to their speedtests? > > Below are the radio stats for this CPE. I attached a word file of the M5 > radio stats as the copied image would not paste correctly on this email. > > Signal: -56dBm > H/V: -59/-58 dBm > > Transmit CCQ: 93% > TX/RX: 72.222mbps/72.222mbps > Firmware 5.6.15 XW > > Airmax is enabled and shows 96% for both. > > Channel Width: 10mhz > Channel Freq: 5805 > Distance is 1.7 miles > TX power 26 > > Access Point is on 5.6.15 XW firmware > > Thank you for your support!! > > Troy Gibson > > Byhalia.net, LLC > _______________________________________________ > Ubnt_users mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > > _______________________________________________ > > Ubnt_users mailing list > > [email protected] > > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > > _______________________________________________ > Ubnt_users mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/ubnt_users > > -- Kurt Albershardt | Mimbres Communications, LLC | 575-342-0042
_______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users
