I have never tested it but I don't believe a 5GHz radio will work on an 11GHz dish if thats what your doing to test. If you have true wireless line of site you should have no problems getting a link with AF11s. What dishes are you using? I agree with Kurt, take the radios back to the bench and make sure they link up. Did you double check your configuration: master-slave, channel size, frequencies, TX-RX flipped on each side, security key, SSID, etc. Any one of those could cause it to not link up. Also make sure your diplexers are in correctly in each radio. We had that once the manufacturer had the sticker on backwards and it would not link up right till we flipped it over. ALso you can test in SISO mode on both sides to see if that helps.
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Forbes Mercy Sent: Friday, September 01, 2017 11:30 AM To: Ubiquiti Users Group Subject: [Ubnt_users] Aligning AF11 We're having some difficulty in aligning a 5.6 mile AirFiber 11 link, they won't associate. We put on a couple of rockets when we couldn't get the 11's to see each other, even with the scan it doesn't see the rocket we put on the other AF11, maybe it's the antenna being tuned to another frequency. The Rocket does see another 5Ghz AP on that tower at -89 but not the one we put on the AF11. Any ideas would be appreciated. Thanks, Forbes Mercy Washington Broadband, Inc. _______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users _______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users
