A couple of items and Forbes if you would like email me (find me on the ubnt forum).
1. Confirm duplexers orientation 2. Run 4.0 official on the radios. Start with the standard config and see that you get them connected before turning on features. Thanks, Alex > On Sep 2, 2017, at 9:03 PM, Mike Hammett <[email protected]> wrote: > > He specifically said he tried it. It's in plain text below. > > > > ----- > Mike Hammett > Intelligent Computing Solutions > > Midwest Internet Exchange > > The Brothers WISP > > From: "Josh Luthman" <[email protected]> > To: "Ubiquiti Users Group" <[email protected]> > Sent: Saturday, September 2, 2017 9:00:49 PM > Subject: Re: [Ubnt_users] Aligning AF11 > > I wouldn't think Forbes would try a 5 GHz radio on an 11 GHz dish... > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > >> On Sep 2, 2017 9:59 PM, "Mike Hammett" <[email protected]> wrote: >> He put a 5 gig Rocket on the dish to A) see if the radios are bad and\or B) >> it propagates better, so would be a better signal >> >> Unfortunately, the dish is likely the wrong shape to help the 5 GHz at all. >> >> >> >> ----- >> Mike Hammett >> Intelligent Computing Solutions >> >> Midwest Internet Exchange >> >> The Brothers WISP >> >> From: "Josh Luthman" <[email protected]> >> To: "Ubiquiti Users Group" <[email protected]> >> Sent: Saturday, September 2, 2017 8:31:13 PM >> Subject: Re: [Ubnt_users] Aligning AF11 >> >> I'm not sure what you're saying as far as the 5 Ghz and 11 Ghz stuff? >> >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >>> On Sat, Sep 2, 2017 at 9:25 PM, Trey Scarborough <[email protected]> wrote: >>> As well when you go back out look at look at your coordination paperwork >>> and it will have your azimuth and any down or up tilt needed. You can >>> use this to align it if you step back from the tower 100' and use a >>> compass until it is line with the dish drop an orange cone or something >>> similar and align the dish with it. This is always a good starting and >>> reference point to align it. >>> >>> >>> On 9/1/2017 10:49 AM, Robert Dillon wrote: >>> > I have never tested it but I don't believe a 5GHz radio will work on an >>> > 11GHz dish if thats what your doing to test. If you have true wireless >>> > line of site you should have no problems getting a link with AF11s. What >>> > dishes are you using? I agree with Kurt, take the radios back to the >>> > bench and make sure they link up. Did you double check your >>> > configuration: master-slave, channel size, frequencies, TX-RX flipped on >>> > each side, security key, SSID, etc. Any one of those could cause it to >>> > not link up. Also make sure your diplexers are in correctly in each >>> > radio. We had that once the manufacturer had the sticker on backwards >>> > and it would not link up right till we flipped it over. ALso you can >>> > test in SISO mode on both sides to see if that helps. >>> > >>> > -----Original Message----- >>> > From: [email protected] [mailto:[email protected]] >>> > On Behalf Of Forbes Mercy >>> > Sent: Friday, September 01, 2017 11:30 AM >>> > To: Ubiquiti Users Group >>> > Subject: [Ubnt_users] Aligning AF11 >>> > >>> > We're having some difficulty in aligning a 5.6 mile AirFiber 11 link, >>> > they won't associate. We put on a couple of rockets when we couldn't >>> > get the 11's to see each other, even with the scan it doesn't see the >>> > rocket we put on the other AF11, maybe it's the antenna being tuned to >>> > another frequency. The Rocket does see another 5Ghz AP on that tower at >>> > -89 but not the one we put on the AF11. >>> > >>> > Any ideas would be appreciated. >>> > >>> > Thanks, >>> > >>> > Forbes Mercy >>> > Washington Broadband, Inc. >>> > _______________________________________________ >>> > Ubnt_users mailing list >>> > [email protected] >>> > http://lists.wispa.org/mailman/listinfo/ubnt_users >>> > >>> > _______________________________________________ >>> > Ubnt_users mailing list >>> > [email protected] >>> > http://lists.wispa.org/mailman/listinfo/ubnt_users >>> > >>> >>> >>> _______________________________________________ >>> Ubnt_users mailing list >>> [email protected] >>> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> >> _______________________________________________ >> Ubnt_users mailing list >> [email protected] >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> >> _______________________________________________ >> Ubnt_users mailing list >> [email protected] >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> > > _______________________________________________ > Ubnt_users mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/ubnt_users > > _______________________________________________ > Ubnt_users mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/ubnt_users
_______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users
