I wouldn't think Forbes would try a 5 GHz radio on an 11 GHz dish... Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
On Sep 2, 2017 9:59 PM, "Mike Hammett" <wispaubntus...@ics-il.net> wrote: > He put a 5 gig Rocket on the dish to A) see if the radios are bad and\or > B) it propagates better, so would be a better signal > > Unfortunately, the dish is likely the wrong shape to help the 5 GHz at all. > > > > ----- > Mike Hammett > Intelligent Computing Solutions <http://www.ics-il.com/> > <https://www.facebook.com/ICSIL> > <https://plus.google.com/+IntelligentComputingSolutionsDeKalb> > <https://www.linkedin.com/company/intelligent-computing-solutions> > <https://twitter.com/ICSIL> > Midwest Internet Exchange <http://www.midwest-ix.com/> > <https://www.facebook.com/mdwestix> > <https://www.linkedin.com/company/midwest-internet-exchange> > <https://twitter.com/mdwestix> > The Brothers WISP <http://www.thebrotherswisp.com/> > <https://www.facebook.com/thebrotherswisp> > <https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg> > ------------------------------ > *From: *"Josh Luthman" <j...@imaginenetworksllc.com> > *To: *"Ubiquiti Users Group" <ubnt_users@wispa.org> > *Sent: *Saturday, September 2, 2017 8:31:13 PM > *Subject: *Re: [Ubnt_users] Aligning AF11 > > I'm not sure what you're saying as far as the 5 Ghz and 11 Ghz stuff? > > > Josh Luthman > Office: 937-552-2340 <(937)%20552-2340> > Direct: 937-552-2343 <(937)%20552-2343> > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Sat, Sep 2, 2017 at 9:25 PM, Trey Scarborough <t...@3dsc.co> wrote: > >> As well when you go back out look at look at your coordination paperwork >> and it will have your azimuth and any down or up tilt needed. You can >> use this to align it if you step back from the tower 100' and use a >> compass until it is line with the dish drop an orange cone or something >> similar and align the dish with it. This is always a good starting and >> reference point to align it. >> >> >> On 9/1/2017 10:49 AM, Robert Dillon wrote: >> > I have never tested it but I don't believe a 5GHz radio will work on an >> 11GHz dish if thats what your doing to test. If you have true wireless >> line of site you should have no problems getting a link with AF11s. What >> dishes are you using? I agree with Kurt, take the radios back to the bench >> and make sure they link up. Did you double check your configuration: >> master-slave, channel size, frequencies, TX-RX flipped on each side, >> security key, SSID, etc. Any one of those could cause it to not link up. >> Also make sure your diplexers are in correctly in each radio. We had that >> once the manufacturer had the sticker on backwards and it would not link up >> right till we flipped it over. ALso you can test in SISO mode on both >> sides to see if that helps. >> > >> > -----Original Message----- >> > From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] >> On Behalf Of Forbes Mercy >> > Sent: Friday, September 01, 2017 11:30 AM >> > To: Ubiquiti Users Group >> > Subject: [Ubnt_users] Aligning AF11 >> > >> > We're having some difficulty in aligning a 5.6 mile AirFiber 11 link, >> > they won't associate. We put on a couple of rockets when we couldn't >> > get the 11's to see each other, even with the scan it doesn't see the >> > rocket we put on the other AF11, maybe it's the antenna being tuned to >> > another frequency. The Rocket does see another 5Ghz AP on that tower at >> > -89 but not the one we put on the AF11. >> > >> > Any ideas would be appreciated. >> > >> > Thanks, >> > >> > Forbes Mercy >> > Washington Broadband, Inc. >> > _______________________________________________ >> > Ubnt_users mailing list >> > Ubnt_users@wispa.org >> > http://lists.wispa.org/mailman/listinfo/ubnt_users >> > >> > _______________________________________________ >> > Ubnt_users mailing list >> > Ubnt_users@wispa.org >> > http://lists.wispa.org/mailman/listinfo/ubnt_users >> > >> >> >> _______________________________________________ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> > > > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > >
_______________________________________________ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
