I'm not sure what you're saying as far as the 5 Ghz and 11 Ghz stuff?
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Sat, Sep 2, 2017 at 9:25 PM, Trey Scarborough <[email protected]> wrote: > As well when you go back out look at look at your coordination paperwork > and it will have your azimuth and any down or up tilt needed. You can > use this to align it if you step back from the tower 100' and use a > compass until it is line with the dish drop an orange cone or something > similar and align the dish with it. This is always a good starting and > reference point to align it. > > > On 9/1/2017 10:49 AM, Robert Dillon wrote: > > I have never tested it but I don't believe a 5GHz radio will work on an > 11GHz dish if thats what your doing to test. If you have true wireless > line of site you should have no problems getting a link with AF11s. What > dishes are you using? I agree with Kurt, take the radios back to the bench > and make sure they link up. Did you double check your configuration: > master-slave, channel size, frequencies, TX-RX flipped on each side, > security key, SSID, etc. Any one of those could cause it to not link up. > Also make sure your diplexers are in correctly in each radio. We had that > once the manufacturer had the sticker on backwards and it would not link up > right till we flipped it over. ALso you can test in SISO mode on both > sides to see if that helps. > > > > -----Original Message----- > > From: [email protected] [mailto:[email protected]] > On Behalf Of Forbes Mercy > > Sent: Friday, September 01, 2017 11:30 AM > > To: Ubiquiti Users Group > > Subject: [Ubnt_users] Aligning AF11 > > > > We're having some difficulty in aligning a 5.6 mile AirFiber 11 link, > > they won't associate. We put on a couple of rockets when we couldn't > > get the 11's to see each other, even with the scan it doesn't see the > > rocket we put on the other AF11, maybe it's the antenna being tuned to > > another frequency. The Rocket does see another 5Ghz AP on that tower at > > -89 but not the one we put on the AF11. > > > > Any ideas would be appreciated. > > > > Thanks, > > > > Forbes Mercy > > Washington Broadband, Inc. > > _______________________________________________ > > Ubnt_users mailing list > > [email protected] > > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > > _______________________________________________ > > Ubnt_users mailing list > > [email protected] > > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > > > _______________________________________________ > Ubnt_users mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/ubnt_users >
_______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users
