My symptoms exactly Steve. I'm starting to wonder if it's a UBNT thing. My Cambium sector does not show those issues although to be fair I do have a few UBNT towers that run great. IDK!
On Mon, Feb 19, 2018 at 2:55 PM, Steve Barnes <st...@pcswin.com> wrote: > Yeah everything is on AIRcontrol. Just can figure it out. > > > > At peak times I can run TCP Btest from PC through CPE to Router on Local > tower2 and get 45-50 Meg. (10Mhz channel) > > > > Btest from Router Tower2 to Router tower1 and get 200Meg. (AF5x link 250M > capacity Only 50-100M used). > > > Tower 1 Connected to GB fiber and can get 700Meg to Dist router at Core > due to traffic. > > > > But from PC through all to Dist router I can only get 8 Mbps at night. > During the morning when traffic is low I can get 45Mbps. So has to be > buffer, retry, MTU, cpu, etc. but I cant pin point it. Ping times stay > pretty stable. AMQ and AMC really good on this AP, 90%+. > > > > Giving some serious thought to Preseem. > > > > *Steve Barnes* > > Wireless Operations Manager > > *New Lisbon Broadband* > > *NLBC.COM <http://NLBC.COM>* > > *PCSWIN.COM <http://PCSWIN.COM>* > > 765-584-2288 ext:1101 > > > > *From:* ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] > *On Behalf Of *Chris J. Ruschmann > *Sent:* Monday, February 19, 2018 1:34 PM > *To:* Ubiquiti Users Group <ubnt_users@wispa.org> > *Subject:* Re: [Ubnt_users] MTU > > > > Are you running air control or anything else that can aggregate the > performance of your site in some nice easy to read graphs? > > > > *From:* ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org > <ubnt_users-boun...@wispa.org>] *On Behalf Of *Steve Barnes > *Sent:* Monday, February 19, 2018 7:38 AM > *To:* Ubiquiti Users Group <ubnt_users@wispa.org> > *Subject:* [Ubnt_users] MTU > > > > I am trying to get every last drop out of our internet. Most towers have > a MikroTik Routing, Netonix doing POE and Switching, Fed by AF5x, and > Rockets or Prism for AP’s. Sometimes seeing some slow downs I cant account > for. Wondering if MTU or Flow control needs adjusted. > > > > The MTU settings are as follows: > > MikroTik MTU: 1500 L2 MTU: 1598 Flow Disabled > > Netonix MTU: 1528 Both > > AF5x Up to 9600 Auto Flow Disabled > > Rocket MTU: 1500 Flow Disabled > > Prism MTU: 1500 Flow Disabled > > > > In your experience should any of these be adjusted? > > > > *Steve Barnes* > > Wireless Operations Manager > > *New Lisbon Broadband* > > *NLBC.COM <http://NLBC.COM>* > > *PCSWIN.COM <http://PCSWIN.COM>* > > 765-584-2288 ext:1101 > > > > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > -- -RickG
_______________________________________________ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users