Are you disabling pause everywhere? Or just Airfiber? Jon Langeler Michwave Technologies, Inc.
> On Feb 19, 2018, at 9:01 PM, Chris J. Ruschmann <[email protected]> wrote: > > Have you tried disabling Pause Frames on the Netonix switch? We’ve had an > issues with Airfibers and that feature on a few sites. > > From: [email protected] [mailto:[email protected]] On > Behalf Of Steve Barnes > Sent: Monday, February 19, 2018 10:56 AM > To: Ubiquiti Users Group <[email protected]> > Subject: Re: [Ubnt_users] MTU > > Yeah everything is on AIRcontrol. Just can figure it out. > > At peak times I can run TCP Btest from PC through CPE to Router on Local > tower2 and get 45-50 Meg. (10Mhz channel) > > Btest from Router Tower2 to Router tower1 and get 200Meg. (AF5x link 250M > capacity Only 50-100M used). > > Tower 1 Connected to GB fiber and can get 700Meg to Dist router at Core due > to traffic. > > But from PC through all to Dist router I can only get 8 Mbps at night. > During the morning when traffic is low I can get 45Mbps. So has to be > buffer, retry, MTU, cpu, etc. but I cant pin point it. Ping times stay > pretty stable. AMQ and AMC really good on this AP, 90%+. > > Giving some serious thought to Preseem. > > Steve Barnes > Wireless Operations Manager > New Lisbon Broadband > NLBC.COM > PCSWIN.COM > 765-584-2288 ext:1101 > > From: [email protected] [mailto:[email protected]] On > Behalf Of Chris J. Ruschmann > Sent: Monday, February 19, 2018 1:34 PM > To: Ubiquiti Users Group <[email protected]> > Subject: Re: [Ubnt_users] MTU > > Are you running air control or anything else that can aggregate the > performance of your site in some nice easy to read graphs? > > From: [email protected] [mailto:[email protected]] On > Behalf Of Steve Barnes > Sent: Monday, February 19, 2018 7:38 AM > To: Ubiquiti Users Group <[email protected]> > Subject: [Ubnt_users] MTU > > I am trying to get every last drop out of our internet. Most towers have a > MikroTik Routing, Netonix doing POE and Switching, Fed by AF5x, and Rockets > or Prism for AP’s. Sometimes seeing some slow downs I cant account for. > Wondering if MTU or Flow control needs adjusted. > > The MTU settings are as follows: > MikroTik MTU: 1500 L2 MTU: 1598 Flow Disabled > Netonix MTU: 1528 Both > AF5x Up to 9600 Auto Flow Disabled > Rocket MTU: 1500 Flow Disabled > Prism MTU: 1500 Flow Disabled > > In your experience should any of these be adjusted? > > Steve Barnes > Wireless Operations Manager > New Lisbon Broadband > NLBC.COM > PCSWIN.COM > 765-584-2288 ext:1101 > > _______________________________________________ > Ubnt_users mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/ubnt_users
_______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users
