Thanks for offering to help! The 43F5 digitizer is another revision of the same touchscreen, so this is very likely the same bug. Before you install anything, could you run these four commands in a terminal and paste the output here?
cat /sys/class/dmi/id/board_name /sys/class/dmi/id/bios_version grep ELAN /proc/interrupts; sleep 1; grep ELAN /proc/interrupts mokutil --sb-state uname -r (Keep your hands off the touchscreen while the second line runs.) What I am looking for: if the ELAN number in the second command jumps by several hundred within that one second, you have the same bug. The third line tells us whether Secure Boot is enabled, which decides which fix you can use. With Secure Boot off, there is a tool you can install in a few minutes; with Secure Boot on, the kernel fix is the way, and yes, once it is accepted upstream it will arrive in Kubuntu's normal kernel updates. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/2142384 Title: ELAN2514:00 (04F3:4428) stylus report rate extremely low (~10–25 Hz) on Ubuntu 24.04 kernel 6.17 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2142384/+subscriptions -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
