impellers, and heat exchanger also visually look at amt of water being discharged out the exhaust should be the same on both engines
> Date: Sat, 2 Oct 2010 08:56:49 -0700 > Subject: [UnifliteWorld] Re: Port Engine Temp > From: [email protected] > To: [email protected] > > I would change out both impellers (port and stbd; do one, do both) and > perhaps move on to pulling the heat exchangers and taking them to a > local radiator shop to have them boiled out. This will give you a > base line at least for routine maintenance items. Those items are > easy to do. If you find you are missing a few vanes from the impeller, > start looking downstream in your cooling system to retrieve the broken > pieces. I would bet you will find your culprit and get to know your > engines. > > Also, if you don't already have one, you might want to invest in a > laser thermometer. Get the engines up to temp and shoot the cooling > system. > > Good luck! > > On Oct 2, 7:32 am, Seattle Chris <[email protected]> wrote: > > I recently purchased a 32 SS with twin Crusdaer 270's. For some reason > > the port side engine temp jumps to 210+ as soon as it has a load, > > while the starboard engine maintains about 150. It hasn't overheated, > > but I don't want to run it until it does. > > I've checked the fresh water filters for water flow and visually they > > both look fine. > > From my initial research, I've read about checking impellers for wear > > or blockage. What other advice do you all have for DX-ing the culprit > > before I begin the project? > > -- > You received this message because you are subscribed to the Google Groups > "UnifliteWorld" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/unifliteworld?hl=en. > -- You received this message because you are subscribed to the Google Groups "UnifliteWorld" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/unifliteworld?hl=en.
