thanks for the new versions It seems to have a couple of loose ends. In the web interface, changes made don't seem to stick. I can set output to HDMI, "submit", but then when returning to the "Squeezelite settings" page, there is no check mark for the HDMI radio button.
After making some changes (HDMI, player name), the player would not restart. The restart option in the 'picoreplayer' tool killed the old player, but no new one ever got started, not even after a reboot. It was dead. But after playing with it for a while longer, it suddenly did restart, and I even got sound out of HDMI. After the next reboot, no sound. After the next reboot, sound was back. So HDMI seems to be basically working. There's also a slight useability problem with the web interface: after choosing 'reboot', the url in the browser window remains at http://raspi:8077/reboot.cgi. So after a while you want to see whether it is back and hit "reload", poof! it reboots again. I changed the overclock option from 900MHz to 800MHz, because I made bad experiences with higher values earlier. Are the hdmi settings you mention, > hdmi_drive=2 > hdmi_force_hotplug=1 > > hdmi_force_edid_audio=1 > > hdmi_ignore_edid=0xa5000080 supposed to go into config.txt? I couldn't find them there. Roman ------------------------------------------------------------------------ arkadi58's Profile: http://forums.slimdevices.com/member.php?userid=21158 View this thread: http://forums.slimdevices.com/showthread.php?t=97803 _______________________________________________ unix mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/unix
