>Hello Listers, I'm trying to install OSX version 10.1 on my Umax S900 >and have failed over and over. I can't seem to figure what I'm doing >wrong. I'll try to give as much detail as I can...I am presently >running OS9.1, XLR8 G3 400MHZ (overclocked to 450), I have ram slots >filled w/128mb sticks (1gig) interleaved . 3 IDE drives WD 20 gig 5 >partitions & 1 IBM 20 gig 5 partitions add'l WD 2gig Slaved and not >partitioned... all drives are formatted HFS Extended (Used either >Intech Speedtools or Apple Setup Utility) . I have 4 Video cards on >hand, a twin turbo (8), Ultimate REZ, Formac Pro 3, ATI Radeon Mac >Edition. > >PCI Slots: During installs... >1. Video Card (Twin Turbo or ATI) >2. Sonnet Tempo ATA 66 >3. Adaptec USB Card ...Slots 4, 5, 6 empty. > >I have attempted to install from version 10.0.3 my wifes IBook disc >and I recently sprung for a 10.1 disk from Apple which is where I'm >at now, Xpostfacto. Recent attempts have been IDE those 3.8 gig >partitions or with the 2 gig "Slave" as target I mentioned, no >success, but I can "Boot back to 9.1 with no problem, sometimes >pressing CUDA, sometimes not having to. With early attempts I was >using an External Quantum/APS SCSI drive 3 gig as the target drive. >External port, I have removed ram to de-interleave, nothing... all >attempts Happy face, then a "Split" Folder and the endless spinning >wheel in the upper left corner of my display (Monitors used a Apple >12", Sony 15" and a Samsung 17") I have just recently subscribed to >this list, a month or so from Supermacs and have read most of the >discussion from this group from that point forward. More >notes...pulled E100 "Jackhammer" card early on to run IDE only >internally. Do I need an internal SCSI drive for install? and I'm not >sure about "correct" Monitor setup? I think all drivers are up to >date. Can anyone help me... My machine has been running very well, a >Kylink I purchased a year ago. I had some RAM issues several months >ago, but they have been resolved successfully. Thanks in advance. >Phillip >-- > Well listers you won't believe this, I was ready to go friday evening with install and my power supply died. I booted the machine, left the room for a few minutes came back to a black screen and silence. Just so happened I purchased a replacement from Small Dog Electronics last month, they had their annual "Garage Sale" so I've spent a day surveying the damage. Its seems that I've "lost" my secondary drive WD Caviar 205BA 20 gig (Master) anyone have experience with recovery from this kind of problem? Anyway my machine is stable now I've attempted to install again and let Xpostfacto boot in Verbose mode. I couldn't write down all that appeared but was able to write down these "3 Lines" that repeated several times:
IO catalog: old world support patched IOSCSCD Drive cannot be loaded. load kernal extension: can't get dependencies for kernal extension get dependency list for kernal extension: "old world support" patch cannot be found. I wrote this down as best I could, does this mean anything to anyone? I removed my USB card, a keyspan not adaptec which I mentioned earlier and >I went into the extensions manager and shut off "Extras" to help >with conflicts. >I removed half of RAM, 528 installed . Thanks to all that responded, >especially Britney & Steve. Phillip -- -- Unsupported OS X is sponsored by <http://lowendmac.com/> Support Low End Mac <http://lowendmac.com/lists/support.html> Unsupported OS X list info <http://lowendmac.com/lists/unsupported.html> Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive <http://www.mail-archive.com/unsupportedosx%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
