Terry- I have a Powerlogix Powerforce G3 card- the 350/512- and it works at 440 Mhz in OS X. I've gotten it up to 450, and am now running it at a very stable 400 Mhz. It's in a Umax J700, but I don't see a major difference between our machines. Could it have something to do with your RAM ?
-Ford On Thursday, April 11, 2002, at 05:04 AM, Terry Allen wrote: >> ----- > Hi there, > Thanks for your reply - the card is a Powerlogix Powerforce G3/400 > I've been trying various bus speeds & the absolute best I've been able > to > achieve is 260MHz on a 45MHz bus. I have tried leaving the multiplier at > the same rate & changing the bus, but on the Powerlogix chart in the > manual, it's virtually a diagonally straight line for the card working > under OSX as follows: > > 40MHz bus - 260MHz processor > 45MHz bus - 247MHz processor > 45MHz bus - 225MHz processor > 46.7MHz bus - 233MHz processor > 50MHz bus - 225MHz processor > > Under OS9.1, the card runs at 400MHz on the 50MHz bus with no > problems. Does anyone know why OSX has a problem with the different CPU > speeds & the bus speeds - is it some sort of dependency on the bus speed > that lets OSX run? > > > Bye for now, Terry Allen -- Unsupported OS X is sponsored by <http://lowendmac.com/> Support Low End Mac <http://lowendmac.com/lists/support.html> Unsupported OS X list info <http://lowendmac.com/lists/unsupported.html> Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive <http://www.mail-archive.com/unsupportedosx%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
