Hi Keirn root/Model/Interactive Tools/Circle Thats where the default depth is set... (and yeah.. things really can be hard to find in this prefs(Options) =) Hope it is that simple. and that it does the trick..!
Take Care Best Regards Stefan Gustafsson ( Beg-inner ) A Proud Owner and User of Real3D and Realsoft3D.. ----- Original Message ----- From: Keirn Hilleary To: [email protected] Sent: Thursday, January 18, 2007 3:03 AM Subject: RE: Cylinder Creation Failure Ah . . . I see the problem the default depth is set to 0.0. I use the numeric window so infrequently that I'd not noticed it. I am combing through the options window looking for a setting that would change this default back to 0.1 but I don't seem to find one. Is there one that you are aware of? And thanks, for your response Neil . . . Keirn -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Neil Cooke Sent: Wednesday, January 17, 2007 7:15 PM To: [email protected] Subject: Re: Cylinder Creation Failure If your cylinder is relatively large then the 0.1 default wall size might not show. In Properties/Specs there will be the two radiuses and the wall height which you can change numerically ... then it will show in the viewport for you to stretch etc. But my guess is that you know all this and maybe you will need to reload SP3 which would be my course of action. Neil Cooke ----- Original Message ----- From: Keirn Hilleary To: [email protected] Sent: Thursday, January 18, 2007 12:51 PM Subject: Cylinder Creation Failure I think I need a reality check here . . I am running 5.x SP3 and I just happened to notice that, either I or Real3d has forgotten how to create a simple analytic cylinder object. No matter how I attempt to create a cylinder, I get only single flat plane as an end result. I am permitted only a single click in the definition portion of its creation and a second click merely finalizes creation. I cannot define radius or length with multiple clicks like all other geometrics . . . Has anyone else experienced this or have I just lost my mind? Keirn ------------------------------------------------------------------------------ No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.430 / Virus Database: 268.16.12/630 - Release Date: 1/15/2007 8:28 PM
