Dear Nil, Thanks again! Yes I can use a normal phone to send and receive sms message.
Attach are my conf. files, pls help! Best Regards, Randal > I use AT commands now with thye same modem as yours and everything works > fine. > To be sure that the problem comes from kannel, try to send and receive a > sms using a normal phone. > If it works then show me your kannel.conff file > > regards > > -----Original Message----- > From: Randal Law [mailto:[EMAIL PROTECTED]] > Sent: dimanche 12 janvier 2003 09:21 > To: [EMAIL PROTECTED] > Cc: [EMAIL PROTECTED] > Subject: RE: Wavecom Modem > > Dear Nil, > > Thanks for the reply! But my phone operator setup is OK. So I think I > have > another problems :( > > In your smsc group, are you using "at2" or "at"? Do you need to set > "need-sleep = true"? > > Anyone also using wavecom fastrack modem WMOM2, pls help! I just afarid > kannel doesnt support this modem :( > > Best Regards, > Randal > >> Hi Randal >> >> I had a similar problem. >> In my case it was due to the chip card of the phone operator that > wasn't >> properly setup. >> I had to put it in a phone and reset it up with the right sms operator >> phone number. >> >> Regards >> >> Nil >> >> -----Original Message----- >> From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]] >> On Behalf Of Randal Law >> Sent: vendredi 10 janvier 2003 17:54 >> To: [EMAIL PROTECTED] >> Subject: Wavecom Modem >> Importance: High >> >> Hi All, >> >> I am using a Wavecom Fastrack WMOD2 Mobile modem. It seem kannel >> successfully initial the modem. But when It sending sms message its > got >> error, please help! Thanks! >> >> bearerbox.log show below: >> 2003-01-10 15:58:51 [0] INFO: ---------------------------------------- >> 2003-01-10 15:58:51 [0] INFO: Kannel bearerbox II version cvs-20030109 >> starting >> 2003-01-10 15:58:51 [0] INFO: MAIN: Start-up done, entering mainloop >> 2003-01-10 15:58:51 [0] DEBUG: AT2[/dev/ttyS0]: start called >> 2003-01-10 15:58:51 [7] DEBUG: sms_router: list_len = 0 >> 2003-01-10 15:58:51 [14] DEBUG: Started thread 16 >> (gw/bb_boxc.c:function) >> 2003-01-10 15:58:51 [16] INFO: Client connected from <127.0.0.1> >> 2003-01-10 15:58:51 [16] DEBUG: setting up systems for new wapbox >> 2003-01-10 15:58:51 [16] DEBUG: Started thread 17 >> (gw/bb_boxc.c:boxc_sender) 2003-01-10 15:58:52 [6] DEBUG: >> AT2[/dev/ttyS0]: >> device opened >> 2003-01-10 15:58:52 [6] INFO: AT2[/dev/ttyS0]: init device >> 2003-01-10 15:58:52 [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 >> 2003-01-10 15:58:52 [6] DEBUG: AT2[/dev/ttyS0]: --> AT^M >> 2003-01-10 15:58:52 [6] DEBUG: AT2[/dev/ttyS0]: <-- OK >> 2003-01-10 15:58:52 [6] DEBUG: AT2[/dev/ttyS0]: --> AT&F^M >> 2003-01-10 15:58:52 [6] DEBUG: AT2[/dev/ttyS0]: <-- OK >> 2003-01-10 15:58:52 [6] DEBUG: AT2[/dev/ttyS0]: --> ATE0^M >> 2003-01-10 15:58:52 [6] DEBUG: AT2[/dev/ttyS0]: <-- OK >> 2003-01-10 15:58:52 [6] DEBUG: AT2[/dev/ttyS0]: --> AT+IFC=2,2^M >> 2003-01-10 15:58:52 [6] DEBUG: AT2[/dev/ttyS0]: <-- OK >> 2003-01-10 15:58:52 [6] DEBUG: AT2[/dev/ttyS0]: --> AT+CPIN?^M >> 2003-01-10 15:58:52 [6] DEBUG: AT2[/dev/ttyS0]: <-- +CPIN: READY >> 2003-01-10 15:59:03 [6] DEBUG: AT2[/dev/ttyS0]: --> AT+CMGF=0^M >> 2003-01-10 15:59:03 [6] DEBUG: AT2[/dev/ttyS0]: <-- OK >> 2003-01-10 15:59:03 [6] DEBUG: AT2[/dev/ttyS0]: --> AT+CSMS=?^M >> 2003-01-10 15:59:03 [6] DEBUG: AT2[/dev/ttyS0]: <-- +CSMS: (0,1) >> 2003-01-10 15:59:03 [6] DEBUG: AT2[/dev/ttyS0]: <-- OK >> 2003-01-10 15:59:03 [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is supported >> 2003-01-10 15:59:03 [6] DEBUG: AT2[/dev/ttyS0]: --> AT+CSMS=1^M >> 2003-01-10 15:59:03 [6] DEBUG: AT2[/dev/ttyS0]: <-- +CSMS: 1,1,1 >> 2003-01-10 15:59:03 [6] DEBUG: AT2[/dev/ttyS0]: <-- OK >> 2003-01-10 15:59:03 [6] DEBUG: AT2[/dev/ttyS0]: --> > AT+CNMI=1,2,0,1,0^M >> 2003-01-10 15:59:03 [6] DEBUG: AT2[/dev/ttyS0]: <-- OK >> 2003-01-10 15:59:03 [6] INFO: AT2[/dev/ttyS0]: AT SMSC successfully >> opened. 2003-01-10 15:59:10 [5] DEBUG: boxc_receiver: sms received >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: TP-Validity-Period: > 24.0 >> hours >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: --> AT+CMGS=16^M >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: <-- > >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: send command status: 1 >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: --> >> 0011000881592197680000A704E8321B0E >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: --> ^Z >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: <-- > >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: <-- ERROR >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: send command status: > -1 >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: --> AT+CMGS=16^M >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: <-- > >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: send command status: 1 >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: --> >> 0011000881592197680000A704E8321B0E >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: --> ^Z >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: <-- > >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: <-- ERROR >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: send command status: > -1 >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: --> AT+CMGS=16^M >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: <-- > >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: send command status: 1 >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: --> >> 0011000881592197680000A704E8321B0E >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: --> ^Z >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: <-- > >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: <-- ERROR >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: send command status: > -1 >> >> kannel.conf show below: >> group = core >> admin-port = 13000 >> smsbox-port = 13001 >> wapbox-port = 13002 >> admin-password = xxx >> wdp-interface-name = "*" >> log-file = "/var/log/kannel/bearerbox.log" >> access-log = "/var/log/kannel/bearer-access.log" >> >> group = smsc >> smsc = at2 >> modemtype = wavecom >> device = /dev/ttyS0 >> speed = 9600 >> >> group = smsbox >> bearerbox-host = sms.xxx.com >> sendsms-port = 13013 >> global-sender = 13013 >> log-file = "/var/log/kannel/smsbox.log" >> access-log = "/var/log/kannel/sms-access.log" >> >> group = sendsms-user >> username = xxx >> password = xxx >> >> # SERVICES >> group = sms-service >> keyword = nop >> text = "You asked nothing and I did it!" >> >> # there should be default always >> group = sms-service >> keyword = default >> text = "No service spesified" >> >> include = "/etc/kannel/modems.conf" >> include = "/etc/kannel/wapbox.conf" >> >> modems.conf show below: >> group = modems >> id = wavecom >> name = "wavecom" >> need-sleep = true >> >> Best Regards, >> Randal > > > *********************************** > OZtel Limited (An OZtell subsidiary) > 1104 Chevalier House, 45-51 Chatham Road > Tsim Sha Tsui, HONG KONG > Tel: (852) 2312-0180 Fax: (852) 2312-0182 > Website: www.oztell.com > *********************************** *********************************** OZtel Limited (An OZtell subsidiary) 1104 Chevalier House, 45-51 Chatham Road Tsim Sha Tsui, HONG KONG Tel: (852) 2312-0180 Fax: (852) 2312-0182 Website: www.oztell.com ***********************************
kannel.conf
Description: Binary data
modems.conf
Description: Binary data
wapbox.conf
Description: Binary data
