Hi Steven, I am using the CVS version cvs-20030109, I think I should try the stable version now.
Thanks alot for the help! Randal > What version you are using? > > I am using Wavecom modem, but a WMOD2B GSM Modem. > > It is working fine in my system, but I am using Kannel > 1.0.5 > > Steven Mak > --- Randal Law <[EMAIL PROTECTED]> wrote: >> Dear Nil, >> >> Thanks again! Yes I can use a normal phone to send >> and receive sms message. >> >> Attach are my conf. files, pls help! >> >> Best Regards, >> Randal >> >> > I use AT commands now with thye same modem as >> yours and everything works >> > fine. >> > To be sure that the problem comes from kannel, try >> to send and receive a >> > sms using a normal phone. >> > If it works then show me your kannel.conff file >> > >> > regards >> > >> > -----Original Message----- >> > From: Randal Law [mailto:[EMAIL PROTECTED]] >> > Sent: dimanche 12 janvier 2003 09:21 >> > To: [EMAIL PROTECTED] >> > Cc: [EMAIL PROTECTED] >> > Subject: RE: Wavecom Modem >> > >> > Dear Nil, >> > >> > Thanks for the reply! But my phone operator setup >> is OK. So I think I >> > have >> > another problems :( >> > >> > In your smsc group, are you using "at2" or "at"? >> Do you need to set >> > "need-sleep = true"? >> > >> > Anyone also using wavecom fastrack modem WMOM2, >> pls help! I just afarid >> > kannel doesnt support this modem :( >> > >> > Best Regards, >> > Randal >> > >> >> Hi Randal >> >> >> >> I had a similar problem. >> >> In my case it was due to the chip card of the >> phone operator that >> > wasn't >> >> properly setup. >> >> I had to put it in a phone and reset it up with >> the right sms operator >> >> phone number. >> >> >> >> Regards >> >> >> >> Nil >> >> >> >> -----Original Message----- >> >> From: [EMAIL PROTECTED] >> > [mailto:[EMAIL PROTECTED]] >> >> On Behalf Of Randal Law >> >> Sent: vendredi 10 janvier 2003 17:54 >> >> To: [EMAIL PROTECTED] >> >> Subject: Wavecom Modem >> >> Importance: High >> >> >> >> Hi All, >> >> >> >> I am using a Wavecom Fastrack WMOD2 Mobile modem. >> It seem kannel >> >> successfully initial the modem. But when It >> sending sms message its >> > got >> >> error, please help! Thanks! >> >> >> >> bearerbox.log show below: >> >> 2003-01-10 15:58:51 [0] INFO: >> ---------------------------------------- >> >> 2003-01-10 15:58:51 [0] INFO: Kannel bearerbox II >> version cvs-20030109 >> >> starting >> >> 2003-01-10 15:58:51 [0] INFO: MAIN: Start-up >> done, entering mainloop >> >> 2003-01-10 15:58:51 [0] DEBUG: AT2[/dev/ttyS0]: >> start called >> >> 2003-01-10 15:58:51 [7] DEBUG: sms_router: >> list_len = 0 >> >> 2003-01-10 15:58:51 [14] DEBUG: Started thread 16 >> >> (gw/bb_boxc.c:function) >> >> 2003-01-10 15:58:51 [16] INFO: Client connected >> from <127.0.0.1> >> >> 2003-01-10 15:58:51 [16] DEBUG: setting up >> systems for new wapbox >> >> 2003-01-10 15:58:51 [16] DEBUG: Started thread 17 >> >> (gw/bb_boxc.c:boxc_sender) 2003-01-10 15:58:52 >> [6] DEBUG: >> >> AT2[/dev/ttyS0]: >> >> device opened >> >> 2003-01-10 15:58:52 [6] INFO: AT2[/dev/ttyS0]: >> init device >> >> 2003-01-10 15:58:52 [6] INFO: AT2[/dev/ttyS0]: >> speed set to 9600 >> >> 2003-01-10 15:58:52 [6] DEBUG: AT2[/dev/ttyS0]: >> --> AT^M >> >> 2003-01-10 15:58:52 [6] DEBUG: AT2[/dev/ttyS0]: >> <-- OK >> >> 2003-01-10 15:58:52 [6] DEBUG: AT2[/dev/ttyS0]: >> --> AT&F^M >> >> 2003-01-10 15:58:52 [6] DEBUG: AT2[/dev/ttyS0]: >> <-- OK >> >> 2003-01-10 15:58:52 [6] DEBUG: AT2[/dev/ttyS0]: >> --> ATE0^M >> >> 2003-01-10 15:58:52 [6] DEBUG: AT2[/dev/ttyS0]: >> <-- OK >> >> 2003-01-10 15:58:52 [6] DEBUG: AT2[/dev/ttyS0]: >> --> AT+IFC=2,2^M >> >> 2003-01-10 15:58:52 [6] DEBUG: AT2[/dev/ttyS0]: >> <-- OK >> >> 2003-01-10 15:58:52 [6] DEBUG: AT2[/dev/ttyS0]: >> --> AT+CPIN?^M >> >> 2003-01-10 15:58:52 [6] DEBUG: AT2[/dev/ttyS0]: >> <-- +CPIN: READY >> >> 2003-01-10 15:59:03 [6] DEBUG: AT2[/dev/ttyS0]: >> --> AT+CMGF=0^M >> >> 2003-01-10 15:59:03 [6] DEBUG: AT2[/dev/ttyS0]: >> <-- OK >> >> 2003-01-10 15:59:03 [6] DEBUG: AT2[/dev/ttyS0]: >> --> AT+CSMS=?^M >> >> 2003-01-10 15:59:03 [6] DEBUG: AT2[/dev/ttyS0]: >> <-- +CSMS: (0,1) >> >> 2003-01-10 15:59:03 [6] DEBUG: AT2[/dev/ttyS0]: >> <-- OK >> >> 2003-01-10 15:59:03 [6] INFO: AT2[/dev/ttyS0]: >> Phase 2+ is supported >> >> 2003-01-10 15:59:03 [6] DEBUG: AT2[/dev/ttyS0]: >> --> AT+CSMS=1^M >> >> 2003-01-10 15:59:03 [6] DEBUG: AT2[/dev/ttyS0]: >> <-- +CSMS: 1,1,1 >> >> 2003-01-10 15:59:03 [6] DEBUG: AT2[/dev/ttyS0]: >> <-- OK >> >> 2003-01-10 15:59:03 [6] DEBUG: AT2[/dev/ttyS0]: >> --> >> > AT+CNMI=1,2,0,1,0^M >> >> 2003-01-10 15:59:03 [6] DEBUG: AT2[/dev/ttyS0]: >> <-- OK >> >> 2003-01-10 15:59:03 [6] INFO: AT2[/dev/ttyS0]: AT >> SMSC successfully >> >> opened. 2003-01-10 15:59:10 [5] DEBUG: >> boxc_receiver: sms received >> >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: >> TP-Validity-Period: >> > 24.0 >> >> hours >> >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: >> --> AT+CMGS=16^M >> >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: >> <-- > >> >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: >> send command status: 1 >> >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: >> --> >> >> 0011000881592197680000A704E8321B0E >> >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: >> --> ^Z >> >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: >> <-- > >> >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: >> <-- ERROR >> >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: >> send command status: >> > -1 >> >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: >> --> AT+CMGS=16^M >> >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: >> <-- > >> >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: >> send command status: 1 >> >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: >> --> >> >> 0011000881592197680000A704E8321B0E >> >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: >> --> ^Z >> >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: >> <-- > >> >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: >> <-- ERROR >> >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: >> send command status: >> > -1 >> >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: >> --> AT+CMGS=16^M >> >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: >> <-- > >> >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: >> send command status: 1 >> >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: >> --> >> >> 0011000881592197680000A704E8321B0E >> > === message truncated === > >> ATTACHMENT part 2 application/octet-stream > name=kannel.conf > > >> ATTACHMENT part 3 application/octet-stream > name=modems.conf > > >> ATTACHMENT part 4 application/octet-stream > name=wapbox.conf > > > > __________________________________________________ > Do you Yahoo!? > Yahoo! Mail Plus - Powerful. Affordable. Sign up now. > http://mailplus.yahoo.com
