What version you are using? I am using Wavecom modem, but a WMOD2B GSM Modem.
It is working fine in my system, but I am using Kannel 1.0.5 Steven Mak --- Randal Law <[EMAIL PROTECTED]> wrote: > Dear Nil, > > Thanks again! Yes I can use a normal phone to send > and receive sms message. > > Attach are my conf. files, pls help! > > Best Regards, > Randal > > > I use AT commands now with thye same modem as > yours and everything works > > fine. > > To be sure that the problem comes from kannel, try > to send and receive a > > sms using a normal phone. > > If it works then show me your kannel.conff file > > > > regards > > > > -----Original Message----- > > From: Randal Law [mailto:[EMAIL PROTECTED]] > > Sent: dimanche 12 janvier 2003 09:21 > > To: [EMAIL PROTECTED] > > Cc: [EMAIL PROTECTED] > > Subject: RE: Wavecom Modem > > > > Dear Nil, > > > > Thanks for the reply! But my phone operator setup > is OK. So I think I > > have > > another problems :( > > > > In your smsc group, are you using "at2" or "at"? > Do you need to set > > "need-sleep = true"? > > > > Anyone also using wavecom fastrack modem WMOM2, > pls help! I just afarid > > kannel doesnt support this modem :( > > > > Best Regards, > > Randal > > > >> Hi Randal > >> > >> I had a similar problem. > >> In my case it was due to the chip card of the > phone operator that > > wasn't > >> properly setup. > >> I had to put it in a phone and reset it up with > the right sms operator > >> phone number. > >> > >> Regards > >> > >> Nil > >> > >> -----Original Message----- > >> From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED]] > >> On Behalf Of Randal Law > >> Sent: vendredi 10 janvier 2003 17:54 > >> To: [EMAIL PROTECTED] > >> Subject: Wavecom Modem > >> Importance: High > >> > >> Hi All, > >> > >> I am using a Wavecom Fastrack WMOD2 Mobile modem. > It seem kannel > >> successfully initial the modem. But when It > sending sms message its > > got > >> error, please help! Thanks! > >> > >> bearerbox.log show below: > >> 2003-01-10 15:58:51 [0] INFO: > ---------------------------------------- > >> 2003-01-10 15:58:51 [0] INFO: Kannel bearerbox II > version cvs-20030109 > >> starting > >> 2003-01-10 15:58:51 [0] INFO: MAIN: Start-up > done, entering mainloop > >> 2003-01-10 15:58:51 [0] DEBUG: AT2[/dev/ttyS0]: > start called > >> 2003-01-10 15:58:51 [7] DEBUG: sms_router: > list_len = 0 > >> 2003-01-10 15:58:51 [14] DEBUG: Started thread 16 > >> (gw/bb_boxc.c:function) > >> 2003-01-10 15:58:51 [16] INFO: Client connected > from <127.0.0.1> > >> 2003-01-10 15:58:51 [16] DEBUG: setting up > systems for new wapbox > >> 2003-01-10 15:58:51 [16] DEBUG: Started thread 17 > >> (gw/bb_boxc.c:boxc_sender) 2003-01-10 15:58:52 > [6] DEBUG: > >> AT2[/dev/ttyS0]: > >> device opened > >> 2003-01-10 15:58:52 [6] INFO: AT2[/dev/ttyS0]: > init device > >> 2003-01-10 15:58:52 [6] INFO: AT2[/dev/ttyS0]: > speed set to 9600 > >> 2003-01-10 15:58:52 [6] DEBUG: AT2[/dev/ttyS0]: > --> AT^M > >> 2003-01-10 15:58:52 [6] DEBUG: AT2[/dev/ttyS0]: > <-- OK > >> 2003-01-10 15:58:52 [6] DEBUG: AT2[/dev/ttyS0]: > --> AT&F^M > >> 2003-01-10 15:58:52 [6] DEBUG: AT2[/dev/ttyS0]: > <-- OK > >> 2003-01-10 15:58:52 [6] DEBUG: AT2[/dev/ttyS0]: > --> ATE0^M > >> 2003-01-10 15:58:52 [6] DEBUG: AT2[/dev/ttyS0]: > <-- OK > >> 2003-01-10 15:58:52 [6] DEBUG: AT2[/dev/ttyS0]: > --> AT+IFC=2,2^M > >> 2003-01-10 15:58:52 [6] DEBUG: AT2[/dev/ttyS0]: > <-- OK > >> 2003-01-10 15:58:52 [6] DEBUG: AT2[/dev/ttyS0]: > --> AT+CPIN?^M > >> 2003-01-10 15:58:52 [6] DEBUG: AT2[/dev/ttyS0]: > <-- +CPIN: READY > >> 2003-01-10 15:59:03 [6] DEBUG: AT2[/dev/ttyS0]: > --> AT+CMGF=0^M > >> 2003-01-10 15:59:03 [6] DEBUG: AT2[/dev/ttyS0]: > <-- OK > >> 2003-01-10 15:59:03 [6] DEBUG: AT2[/dev/ttyS0]: > --> AT+CSMS=?^M > >> 2003-01-10 15:59:03 [6] DEBUG: AT2[/dev/ttyS0]: > <-- +CSMS: (0,1) > >> 2003-01-10 15:59:03 [6] DEBUG: AT2[/dev/ttyS0]: > <-- OK > >> 2003-01-10 15:59:03 [6] INFO: AT2[/dev/ttyS0]: > Phase 2+ is supported > >> 2003-01-10 15:59:03 [6] DEBUG: AT2[/dev/ttyS0]: > --> AT+CSMS=1^M > >> 2003-01-10 15:59:03 [6] DEBUG: AT2[/dev/ttyS0]: > <-- +CSMS: 1,1,1 > >> 2003-01-10 15:59:03 [6] DEBUG: AT2[/dev/ttyS0]: > <-- OK > >> 2003-01-10 15:59:03 [6] DEBUG: AT2[/dev/ttyS0]: > --> > > AT+CNMI=1,2,0,1,0^M > >> 2003-01-10 15:59:03 [6] DEBUG: AT2[/dev/ttyS0]: > <-- OK > >> 2003-01-10 15:59:03 [6] INFO: AT2[/dev/ttyS0]: AT > SMSC successfully > >> opened. 2003-01-10 15:59:10 [5] DEBUG: > boxc_receiver: sms received > >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: > TP-Validity-Period: > > 24.0 > >> hours > >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: > --> AT+CMGS=16^M > >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: > <-- > > >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: > send command status: 1 > >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: > --> > >> 0011000881592197680000A704E8321B0E > >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: > --> ^Z > >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: > <-- > > >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: > <-- ERROR > >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: > send command status: > > -1 > >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: > --> AT+CMGS=16^M > >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: > <-- > > >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: > send command status: 1 > >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: > --> > >> 0011000881592197680000A704E8321B0E > >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: > --> ^Z > >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: > <-- > > >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: > <-- ERROR > >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: > send command status: > > -1 > >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: > --> AT+CMGS=16^M > >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: > <-- > > >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: > send command status: 1 > >> 2003-01-10 15:59:11 [6] DEBUG: AT2[/dev/ttyS0]: > --> > >> 0011000881592197680000A704E8321B0E > === message truncated === > ATTACHMENT part 2 application/octet-stream name=kannel.conf > ATTACHMENT part 3 application/octet-stream name=modems.conf > ATTACHMENT part 4 application/octet-stream name=wapbox.conf __________________________________________________ Do you Yahoo!? Yahoo! Mail Plus - Powerful. Affordable. Sign up now. http://mailplus.yahoo.com
