Hello. Basically Ovirt operates with VLANs by creating tagged devices ethX.<ID> and attaching them to the bridge named <network_name>.
For example: ovirt has ovirtmgmg, spice and 3 vm's networks: ovirtmgm (VLAN100), spice (VLAN101), vmnet1-3 (VLAN 201-203) Bridges for each networks will be created and attached: ovirtmgmt eth0.100 spice eth0.101 vmnet1 eth0.201 vnet1 -- VM will be attached here vmnet2 eth0.202 vnet2 -- VM will be attached here vmnet3 eth0.203 vnet3 -- VM will be attached here and so on. A VM is attached using the tun interface to the VM network You don't have to assign IP address to the bridge of any VM networks. IP addresses are required only for ovirtmgmt and display networks. -- Best regards, Pavel Zhukov mailto:pa...@zhukoff.net On Mon, 11 Feb 2013, Matt . wrote: > I'm struggeling setting up my network in oVirt at the moment as I would like > to > seperate specific VM's from other devices/clients in my network. > > I have decent setup switching network using Vlans, this is also the fact for > ovirt and the storage nodes where teh ports are seperated between storage and > management. > > Because I want to manage which client can acces which VM I need Vlan tagging. > The question is where are we going to do this, on the VM itself or on the > network I attach the VM's Nic to. > > Because of the lacking documentation at this point it's not clear, so I would > like to figure out and maybe change the wiki there. > > I also cannot understand why I can set an IP to a network and only the subnet > where I also can set DHCP which puts also the gateway. > > I'm not able to set None or DHCP and can only add a network with IP, but what > IP and why ? Or just a 192.16.x.0 with a 255.255.255.0 subnet ? > > I hope someone can clear this a little bit more out. > > Thanks! > _______________________________________________ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users