On 02/13/2013 12:40 AM, Matt . wrote: > Hi guys, > > Thanks, this clears it more why we have VM and display options and how > it's used on the nics. > > What hapens with me on a 3.2 installation when I want to attach a > network without IP (VM option or not) to a Nic I get the noticed error > like I told before: > > Error while executing action Setup Networks: Illegal or Incomplete IP > Address > > > Here is the error from the log:
Could you attach the rest parameters of this command ? (grep for all the lines from the log that include the string: 7289062c) > > eth2 {id=713f2687-6d84-4010-9076-fbfc67cf6831, > vdsId=033febb8-4f52-4253-bb6d-a8807816affd, name=eth2, > macAddress=00:1c:c4:d8:cb:36, networkName=LAN_TEST, bondName=null, > bootProtocol=NONE, address=, subnet=, gateway=null, mtu=0, > bridged=false, speed=1000, type=0, networkImplementationDetails=null}], > removedNetworks=[], > removedBonds=[]), log id: 7a99dbd1 > 2013-02-12 23:31:08,783 INFO > [org.ovirt.engine.core.vdsbroker.vdsbroker.SetupNetworksVDSCommand] > (ajp--127.0.0.1-8702-10) [7289062c] FINISH, SetupNetworksVDSCommand, log > id: 7a99dbd1 > 2013-02-12 23:31:09,796 ERROR > [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase] > (ajp--127.0.0.1-8702-10) [7289062c] > org.ovirt.engine.core.vdsbroker.vdsbroker.VDSNetworkException: > VDSGenericException: VDSNetworkException: Specified netmask or gateway > but not ip > 2013-02-12 23:31:09,797 ERROR > [org.ovirt.engine.core.vdsbroker.VDSCommandBase] > (ajp--127.0.0.1-8702-10) [7289062c] Command SetupNetworksVDS execution > failed. Exception: VDSNetworkException: VDSGenericException: > VDSNetworkException: Specified netmask or gateway but not ip > 2013-02-12 23:31:09,798 ERROR > [org.ovirt.engine.core.bll.network.host.SetupNetworksCommand] > (ajp--127.0.0.1-8702-10) [7289062c] Command > org.ovirt.engine.core.bll.network.host.SetupNetworksCommand throw Vdc > Bll exception. With error message VdcBLLException: > org.ovirt.engine.core.vdsbroker.vdsbroker.VDSNetworkException: > VDSGenericException: VDSNetworkException: Specified netmask or gateway > but not ip > > > Why does this happen on None Bootproto or DHCP ? > > > 2013/2/12 Moti Asayag <masa...@redhat.com <mailto:masa...@redhat.com>> > > On 02/11/2013 12:37 PM, Matt . wrote: > > I'm struggeling setting up my network in oVirt at the moment as I > would > > like to seperate specific VM's from other devices/clients in my > network. > > > > You should define the 'logical networks' which describe the networks of > your setup. > See the response to Nicolas on this thread of the steps to achieve it. > If wish to create a network dedicated to storage which shouldn't allow > VMs to use it, it should be defined as non-vm network. > Once the network is assigned to a cluster, you can add new network > interface to your VMs which defines to which bridges (vm networks) they > are connected: hence, segregating the VMs is done by the vlan-id of the > bridge the VMs are connected to. > > > > I have decent setup switching network using Vlans, this is also > the fact > > for ovirt and the storage nodes where teh ports are seperated between > > storage and management. > > > > Because I want to manage which client can acces which VM I need Vlan > > tagging. The question is where are we going to do this, on the VM > itself > > or on the network I attach the VM's Nic to. > > > > Because of the lacking documentation at this point it's not clear, > so I > > would like to figure out and maybe change the wiki there. > > > > I also cannot understand why I can set an IP to a network and only the > > subnet where I also can set DHCP which puts also the gateway. > > > > The default gateway can be provided for the management network only. You > can define its IP address either as static by providing its known IP > address or letting it determine the address from the DHCP server. > You cannot select 'None' as boot-protocol for the management network > since then the engine will not be able to communicate with the host. > > However you can select 'none' boot-protocol to any other networks if > wishes. > > > I'm not able to set None or DHCP and can only add a network with > IP, but > > what IP and why ? Or just a 192.16.x.0 with a 255.255.255.0 subnet ? > > > > I hope someone can clear this a little bit more out. > > > > > > > Thanks! > > > > > > _______________________________________________ > > Users mailing list > > Users@ovirt.org <mailto:Users@ovirt.org> > > http://lists.ovirt.org/mailman/listinfo/users > > > > _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users