Also change NAME=em1 to: DEVICE=em1 and remove the # from the BOOTPROTO=none
----- Original Message ----- From: "Michael Burman" <[email protected]> To: "Lars Nielsen" <[email protected]> Cc: [email protected] Sent: Tuesday, January 13, 2015 4:48:55 PM Subject: Re: [ovirt-users] Host in NonOperational mode ovirtmgmt network missing Hi Lars First of all you have to decide from where your ovirtmgmt getting the ip, if it is from a dhcp server, you have to delete this lines from your ifcfg-ovirtmgmt file: IPADDR=192.168.1.10 NETMASK=255.255.255.0 GATEWAY=192.168.0.1 and add the next line: NM_CONTROLLED=no - in the ifcfg-em1 file change: BOOTPROTO=none and add the line: NM_CONTROLLED=no restart your engine /etc/init.d/ovirt-engine restart and make sure your ovirtmgmt got ip and you have a default gateway, you can run: route -n Put your host in maintenance mode , try to activate or re-install. Best regards, Michael B ----- Original Message ----- From: "Lars Nielsen" <[email protected]> To: "Yedidyah Bar David" <[email protected]> Cc: [email protected] Sent: Tuesday, January 13, 2015 12:05:05 PM Subject: Re: [ovirt-users] Host in NonOperational mode ovirtmgmt network missing On 13/01/15 10:33, Yedidyah Bar David wrote: > ----- Original Message ----- >> From: "Lars Nielsen"<[email protected]> >> To: "Yedidyah Bar David"<[email protected]> >> Cc:[email protected] >> Sent: Tuesday, January 13, 2015 11:26:55 AM >> Subject: Re: [ovirt-users] Host in NonOperational mode ovirtmgmt network >> missing >> >> >> On 13/01/15 09:31, Yedidyah Bar David wrote: >>> ----- Original Message ----- >>>> From: "Lars Nielsen"<[email protected]> >>>> To:[email protected] >>>> Sent: Tuesday, January 13, 2015 10:20:20 AM >>>> Subject: [ovirt-users] Host in NonOperational mode ovirtmgmt network >>>> missing >>>> >>>> Hey I am new to oVirt, so please be patient >>>> >>>> I have a problem, when setting up new hosts. >>>> Doing the setup it self no problem, but afterwards the status is set to >>>> NonOperational. >>>> Do to the network ovirtmgmt is missing on the machine. >>>> >>>> However I have added the following ifcfg file: >>>> ifcfg-ovirtmgmt:: >>>> DEVICE=ovirtmgmt >>>> TYPE=Bridge >>>> ONBOOT=yes >>>> DELAY=0 >>>> BOOTPROTO=dhcp >>>> IPADDR=192.168.1.10 >>>> NETMASK=255.255.255.0 >>>> GATEWAY=192.168.0.1 >>>> >>>> And made the adjustments, so the ifcfg-en1, file looks like this: >>>> TYPE="Ethernet" >>>> #BOOTPROTO="dhcp" >>>> DEFROUTE="yes" >>>> IPV4_FAILURE_FATAL="no" >>>> IPV6INIT="yes" >>>> IPV6_AUTOCONF="yes" >>>> IPV6_DEFROUTE="yes" >>>> IPV6_PEERDNS="yes" >>>> IPV6_PEERROUTES="yes" >>>> IPV6_FAILURE_FATAL="no" >>>> NAME="em1" >>>> UUID="bdc14160-3cb6-48d7-b8b9-a382dc384add" >>>> ONBOOT="yes" >>>> HWADDR="F8:B1:56:C1:F9:8E" >>>> PEERDNS="yes" >>>> PEERROUTES="yes" >>>> BRIDGE=ovirtmgmt >>>> >>>> >>>> I do realize that, the guides on the web for oVirt set BOOTPROTO to >>>> static. But at the office, we do not have the possibility of static IP, >>>> at the moment. >>>> >>>> Can some one please tell me what could be wrong ? >>> dhcp should work too. The problem is with NetworkManager. >>> You'll need to have static IPs though for the engine to be able to >>> contact the hosts (as well as the hosts themselves, for hosted-engine HA >>> at least), or you'll have problems if they for some reason get a different >>> IP address from your dhcp server. >>> >>> Please post relevant logs: >>> hosts - /var/log/ovirt-hosted-engine*/*, /var/log/vdsm/* >>> engine - /var/log/ovirt-engine/* >>> >>> Thanks and best regards, >> Okay something seems to be a food here, because on the server hosting >> our oVirt instance. We do not have a /var/log/ovirt-hosted-engine >> directory. > I didn't say you should - I wrote a '*' in the end. You should find > /var/log/ovirt-hosted-engine-ha > /var/log/ovirt-hosted-engine-setup > > But now I realize you did not mention hosted-engine. Can you detail > a bit your setup? Where is the engine? Where are the hosts? How > did you install and setup? > >> However the log files from the two other directories, can be found here: >> https://dl.dropboxusercontent.com/u/55488/ovirt_ovirtlogs.tar > Please add from engine also /var/log/ovirt-engine/host-deploy/* . > > Thanks! We do not have any ovirt-hosted-engine-* on the server, how ever here is a link to the complete ovirt-engine folder: https://dl.dropboxusercontent.com/u/55488/ovirt-engine.tar Thanks and Best Regards - Lars _______________________________________________ Users mailing list [email protected] http://lists.ovirt.org/mailman/listinfo/users -- Michael Burman Intern in RedHat Israel, RHEV-M QE Network Team Mobile: 054-5355725 IRC: mburman _______________________________________________ Users mailing list [email protected] http://lists.ovirt.org/mailman/listinfo/users -- Michael Burman Intern in RedHat Israel, RHEV-M QE Network Team Mobile: 054-5355725 IRC: mburman _______________________________________________ Users mailing list [email protected] http://lists.ovirt.org/mailman/listinfo/users
