Nate,

I also tried release 4 sg1 directory dev.direct file...  same error as below...

I also tried release 3 dev.direct...  Was able to log in through root... made 
the vi alterations to the interfaces file...  but was unable to ping...

Here is the E310 info:

P/N 156333E-01L

S/N 8117FF1

How soon can I get another E310 shipped to me???  Unfortunately, I need to have 
a design ready for my project by early September.  I really need a replacement 
pretty fast, if possible?

Thanks,

Konstantin

-----Original Message-----
From: Nate Temple [mailto:nate.tem...@ettus.com] 
Sent: Tuesday, August 08, 2017 1:21 PM
To: Matheou, Konstantin J. (GRC-LCI0)[ZIN TECHNOLOGIES INC] 
<konstantin.j.math...@nasa.gov>
Cc: Marcus Müller <marcus.muel...@ettus.com>; usrp-users 
<usrp-users@lists.ettus.com>
Subject: Re: [USRP-users] When ssh'ing Getting prompt for Password Issue

Hi Konstantin,

Can you please send the full part number and serial number for your device. It 
is located on the label on the bottom side of the E3xx. ( "P/N: XXXXXX", "S/N: 
XXXXXXX" )

Regards,
Nate Temple


> On Aug 8, 2017, at 8:33 AM, Matheou, Konstantin J. (GRC-LCI0)[ZIN 
> TECHNOLOGIES INC] <konstantin.j.math...@nasa.gov> wrote:
> 
> OK…  Used the backup microSD we ordered.  Reprogrammed it with the same 
> .direct file…  Same error as below…
>  
> “Unable to read file uImage-zynq-e31x-3.dtb”
>  
> Now, either I am loading a incorrect image, or something is not working 
> correctly with the unit.
>  
> Please tell me your thoughts…
>  
> Thanks…
>  
> From: Matheou, Konstantin J. (GRC-LCI0)[ZIN TECHNOLOGIES INC] 
> Sent: Tuesday, August 08, 2017 11:29 AM
> To: 'Nate Temple' <nate.tem...@ettus.com>; 'Marcus Müller' 
> <marcus.muel...@ettus.com>
> Cc: 'usrp-users' <usrp-users@lists.ettus.com>
> Subject: RE: [USRP-users] When ssh'ing Getting prompt for Password Issue
>  
> Btw.. just to validate what image I used…
>  
> I have the E310 E version…
>  
> The instructions I think may not be correct…  Here they are cut and paste…  
> Please validate….
>  
> For the E310, the product number will be 156333X-01L, where X is a letter 
> from A to Z. For devices where X is A, B, C, D, the images under the 
> "ettus-e3xx-sg1" folder should be used. For devices where X is E or later, 
> the images under the "ettus-e3xx-sg3" folder should be used. (WHAT I USED) 
> You must use the appropriate image for your specific device. The incorrect 
> image will not work, and will only boot as far as the U-Boot boot loader 
> before stopping.
> 
>  
> 
> BUT this is what is written also…
> 
>  
> 
> For the E312, the product number will be 140605X-01L, where X is a letter 
> from A to Z. The images under the "ettus-e3xx-sg3" folder should be used for 
> all E312 devices.
> 
>  
> So you told me to go to release 4 (also the directions did)…  and then I 
> chose the sg3 directory – Is this correct???  Thus, both the E310 E and E312 
> devices use the sg3 directory????
>  
> I used the Ettus-3xx-sg3 directory and downloaded those versions.  I am 
> assuming they are the correct versions.
>  
> Thanks…
>  
> From: Matheou, Konstantin J. (GRC-LCI0)[ZIN TECHNOLOGIES INC] 
> Sent: Tuesday, August 08, 2017 11:15 AM
> To: 'Nate Temple' <nate.tem...@ettus.com>; Marcus Müller 
> <marcus.muel...@ettus.com>
> Cc: usrp-users <usrp-users@lists.ettus.com>
> Subject: RE: [USRP-users] When ssh'ing Getting prompt for Password Issue
>  
> Nate,
>  
> The instructions are very well written and detailed.. Thanks…
>  
> Actually, most of the steps I was doing correctly from all the various 
> portions of documents.  But it is good you placed all in one document.  
> Thanks…
>  
> Everything worked well up until I burned the image. 
>  
> When I did the terminal  command - sudo screen /dev/ttyUSB0 115200 – and then 
> turned on the E310, I received “Unable to read file uImage-zynq-e31x-3.dtb”
>  
> I tried both tx version – demo and dev…  Both did the same thing…
>  
> I have another SD card that we ordered with the unit.  I will try to re-image 
> that card and see hwat happens…  Of course, I will let you know.
>  
> Thanks,
>  
> Konstantin
>  
> From: Nate Temple [mailto:nate.tem...@ettus.com] 
> Sent: Monday, August 07, 2017 9:29 PM
> To: Marcus Müller <marcus.muel...@ettus.com>
> Cc: usrp-users <usrp-users@lists.ettus.com>; Matheou, Konstantin J. 
> (GRC-LCI0)[ZIN TECHNOLOGIES INC] <konstantin.j.math...@nasa.gov>
> Subject: Re: [USRP-users] When ssh'ing Getting prompt for Password Issue
>  
> Hi Konstantin,
> 
> Please see the updated version of the PDF, attached to this email. One of the 
> screen captures needed to be updated.
> 
> Regards,
> Nate Temple
> 
> 
> 
> 
> Previous message
> -------------------------------
> Hi Konstantin,
> 
> I had an error in my previous email. The default setting for the release-4 
> image is to have a DHCP address. You'll need to edit /etc/network/interfaces 
> and update it to operate with a static IP.
> 
> Please see the attached PDF that will walk through the process of burning the 
> release-4 SD Card image to a blank SD Card, and then the required steps to 
> configure the Ubuntu VM within the Windows host to connect via the Serial 
> interface to update the /etc/network/interfaces file, and then connect via 
> SSH.
> 
> Also, with 1GbE connections, you do not need to use a cross over cable. 1GbE 
> has auto-MDIX which will allow a normal straight through ethernet cable to be 
> used when directly connecting devices. 
> 
> Regards,
> Nate Temple
> -------------------------------

_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
  • Re:... Derek Kozel via USRP-users
  • Re:... Matheou, Konstantin J. (GRC-LCI0)[ZIN TECHNOLOGIES INC] via USRP-users
  • Re:... Derek Kozel via USRP-users
  • Re:... Matheou, Konstantin J. (GRC-LCI0)[ZIN TECHNOLOGIES INC] via USRP-users
  • Re:... Matheou, Konstantin J. (GRC-LCI0)[ZIN TECHNOLOGIES INC] via USRP-users
  • Re:... Marcus Müller via USRP-users
  • Re:... Matheou, Konstantin J. (GRC-LCI0)[ZIN TECHNOLOGIES INC] via USRP-users
  • Re:... Matheou, Konstantin J. (GRC-LCI0)[ZIN TECHNOLOGIES INC] via USRP-users
  • Re:... Matheou, Konstantin J. (GRC-LCI0)[ZIN TECHNOLOGIES INC] via USRP-users
  • Re:... Nate Temple via USRP-users
  • Re:... Matheou, Konstantin J. (GRC-LCI0)[ZIN TECHNOLOGIES INC] via USRP-users
  • Re:... Nate Temple via USRP-users
  • Re:... Matheou, Konstantin J. (GRC-LCI0)[ZIN TECHNOLOGIES INC] via USRP-users
  • Re:... Nate Temple via USRP-users
  • Re:... Nate Temple via USRP-users
  • Re:... Matheou, Konstantin J. (GRC-LCI0)[ZIN TECHNOLOGIES INC] via USRP-users
  • Re:... Nate Temple via USRP-users
  • Re:... Matheou, Konstantin J. (GRC-LCI0)[ZIN TECHNOLOGIES INC] via USRP-users
  • Re:... Nate Temple via USRP-users
  • Re:... Matheou, Konstantin J. (GRC-LCI0)[ZIN TECHNOLOGIES INC] via USRP-users
  • Re:... Nate Temple via USRP-users

Reply via email to