Kevin
You will have to drain the oil or lean the bike over on the side stand(I would just
drain
it). The slave cylinder for the clutch is behind the cover extension on the left side
(opposite from the clutch cover). I would check and make sure the slave is also good.
I
had to rebuild mine last year. It is easy and cheap just make sure you get the gaskets
for
the covers.
Paulo
>I've already taken off the footpeg and shift lever. I've
>removed all but one of the allen head bolts that hold
>the clutch cover on. The bottom bolt has a copper
>washer, and when I removed it for a second, oil began
>to pour out of the hole. Is this normal? Will I have to
>drain the oil from the bike to get at the clutch piston?
Thanks,
Kevin Winters
.............................................
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.............................................
