If I hook a gage to a disk brake system I will see "0"
pressure when lever is released . I worked in a brake shop
and never saw a check valve in a brake system . I know that there are
expansion valves . Guess I keep learning :)
Eric h.
----- Original Message -----
From: "TC" <[EMAIL PROTECTED]>
To: "V-MAX TECH LIST" <[EMAIL PROTECTED]>
Sent: Tuesday, October 24, 2000 11:22 AM
Subject: Re: check valve
> Eric,
> Well .. we will just have to dis-agree on that one. All "disc" brake
> systems must have a check valve of some type and usually this is a
> function of the master cylinder. Inline valves can be purchased to
> permit use of open master cylinders for conversions or hybrid systems
> on cars, (they are available with several different pressure ratings
> .. usually from 1 to 10 lbs and are sometimes referred to as "residual
> pressure valves").
>
> >From Wildwood Engineering who actually sells these things for
> conversions ...
> "Residual pressure valves maintain a nominal amount of pressure in the
> brake system to alleviate fluid from draining back towards the master
> cylinder and causing excessive pedal travel."
> campbell
>
> ----- Original Message -----
> From: "Eric Harnish" <[EMAIL PROTECTED]>
> Subject: Re: check valve
>
>
> > No check valve in a brake system . Pistons move away by elasticity
> of
> > the piston seals and this is a set design limit . If
> > snip <
>
> .............................................
> To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
> .............................................
.............................................
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.............................................
