If you see visible leakage then cleaning is in order as the electrolyte can short out traces on the motherboard. Good luck on your repair so far.
> Subject: Re: Are my 2 Powerbook 100 only for the trashcan? > From: [email protected] > Date: Mon, 5 Aug 2013 20:15:51 +0200 > To: [email protected] > > Ok, here is a quick report: > After replacing 11 caps (work doesn't leave much spare time) I tried to check > the status by remounting it and giving power. Nothing happened, no sound at > all. At this point I decided to review and retouch the soldering I had > already done and after this I was able to hear the start sound again. > Now I have recovered at least the same behaviour I had at the beginning but > this means that the Pb100 doesn't work yet. There are still many caps to > replace and I still hope. > During the replacement I could notice that all the 47uF had some amber liquid > right below them, now I will attack the 10uF. If I remember correctly from > your previous email, you replaced them all, didn't you? > Anyway, I am having much fun! > One more thing, I will take a picture of the hidden side of the motherboard > and I am interested in comparing it with some other, there are some wired > connections that don't convince me much. May you take one too and post it? > > G > > On Aug 5, 2013, at 19:55, Hardware Mack <[email protected]> wrote: > > > Hey, how is the progress going on this buddy? > > any luck? > > > > maybe tuesday or wed i'll be able to re-cap another pb100. > > > > -- > -- > ----- > You received this message because you are a member of the Vintage Macs group. > The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our > netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml > To post to this group, send email to [email protected] > To leave this group, send email to [email protected] > For more options, visit this group at > http://groups.google.com/group/vintage-macs > > Support for older Macs: http://lowendmac.com/services/ > --- > You received this message because you are subscribed to the Google Groups > "Vintage Macs" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > > -- -- ----- You received this message because you are a member of the Vintage Macs group. The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To leave this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/vintage-macs Support for older Macs: http://lowendmac.com/services/ --- You received this message because you are subscribed to the Google Groups "Vintage Macs" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
