http://68kmla.org/forums/viewtopic.php?f=10&t=21751
ok i completed a complete cap break down of the Powerbook 100, all the details are in the link. Right now this is just the Mainboard and CPU The Screen i will do later. On Aug 5, 2013, at 4:32 PM, Jason Johnson wrote: > If you see visible leakage then cleaning is in order as the electrolyte can > short out traces on the motherboard. Good luck on your repair so far. > > > Subject: Re: Are my 2 Powerbook 100 only for the trashcan? > > From: [email protected] > > Date: Mon, 5 Aug 2013 20:15:51 +0200 > > To: [email protected] > > > > Ok, here is a quick report: > > After replacing 11 caps (work doesn't leave much spare time) I tried to > > check the status by remounting it and giving power. Nothing happened, no > > sound at all. At this point I decided to review and retouch the soldering I > > had already done and after this I was able to hear the start sound again. > > Now I have recovered at least the same behaviour I had at the beginning but > > this means that the Pb100 doesn't work yet. There are still many caps to > > replace and I still hope. > > During the replacement I could notice that all the 47uF had some amber > > liquid right below them, now I will attack the 10uF. If I remember > > correctly from your previous email, you replaced them all, didn't you? > > Anyway, I am having much fun! > > One more thing, I will take a picture of the hidden side of the motherboard > > and I am interested in comparing it with some other, there are some wired > > connections that don't convince me much. May you take one too and post it? > > > > G > > > > On Aug 5, 2013, at 19:55, Hardware Mack <[email protected]> wrote: > > > > > Hey, how is the progress going on this buddy? > > > any luck? > > > > > > maybe tuesday or wed i'll be able to re-cap another pb100. > > > > > > > -- > > -- > > ----- > > You received this message because you are a member of the Vintage Macs > > group. > > The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our > > netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml > > To post to this group, send email to [email protected] > > To leave this group, send email to [email protected] > > For more options, visit this group at > > http://groups.google.com/group/vintage-macs > > > > Support for older Macs: http://lowendmac.com/services/ > > --- > > You received this message because you are subscribed to the Google Groups > > "Vintage Macs" group. > > To unsubscribe from this group and stop receiving emails from it, send an > > email to [email protected]. > > For more options, visit https://groups.google.com/groups/opt_out. > > > > > -- > -- > ----- > You received this message because you are a member of the Vintage Macs group. > The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our > netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml > To post to this group, send email to [email protected] > To leave this group, send email to [email protected] > For more options, visit this group at > http://groups.google.com/group/vintage-macs > > Support for older Macs: http://lowendmac.com/services/ > --- > You received this message because you are subscribed to the Google Groups > "Vintage Macs" group. > To unsubscribe from this group and stop receiving emails from it, send an > email [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. -- -- ----- You received this message because you are a member of the Vintage Macs group. The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To leave this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/vintage-macs Support for older Macs: http://lowendmac.com/services/ --- You received this message because you are subscribed to the Google Groups "Vintage Macs" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
