So, I'm sure this has been seen a few times, but I cannot find anything that helps.
I have: A win2000 box, diamond 192.168.0.1, running openssh 3.4p1 under cygwin, and winVNC 3.3.3 R9, both running as a service. I can ssh OR VNC from another win200 box, amethyst 192.168.0.14; or a mac OSX (10.0.3) 192.168.0.3 named OSX to diamond. From amethyst (I know it much better than the mac) I connect using either SSH.com's client Tunneling: Name VNC Listening Port 5911 Dest Host 192.168.0.1 Dest Port 5910 Allow Local Connection Either Yes or No cygwin/openssh using ssh -C -L 5910:192.168.0.1:5911 [EMAIL PROTECTED] and it connects fine. However with the vncclient 'localhost:11' I just hang doing nothing. Relevant, hopefully helpful stuff: Diamond: HKEY_LOCAL_MACHINE:SOFTWARE:ORL:WinVNC3 AllowLoopback REG_DWORD 0x00000001 (1) DebugLevel REG_DWORD 0x00000005 (5) DebugMode REG_DWORD 0x00000007 (7) LoopbackOnly REG_DWORD 0x00000000 (0) But I get no log output from WinVNC! So, temporarily adjusting the sshd service to sshd.exe -d for debugging. I have to restart the service after every session to get it to accept my password (?) I get: debug1: sshd version OpenSSH_3.4p1 debug1: private host key: #0 type 0 RSA1 debug1: read PEM private key done: type RSA debug1: private host key: #1 type 1 RSA debug1: read PEM private key done: type DSA debug1: private host key: #2 type 2 DSA debug1: Bind to port 22 on 0.0.0.0. Server listening on 0.0.0.0 port 22. Generating 768 bit RSA key. RSA key generation complete. debug1: Server will not fork when running in debugging mode. Connection from 192.168.0.14 port 1402 debug1: Client protocol version 2.0; client software version OpenSSH_3.4p1 debug1: match: OpenSSH_3.4p1 pat OpenSSH* Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-1.99-OpenSSH_3.4p1 debug1: list_hostkey_types: ssh-rsa,ssh-dss debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: client->server aes128-cbc hmac-md5 zlib debug1: kex: server->client aes128-cbc hmac-md5 zlib debug1: SSH2_MSG_KEX_DH_GEX_REQUEST received debug1: SSH2_MSG_KEX_DH_GEX_GROUP sent debug1: dh_gen_key: priv key bits set: 139/256 debug1: bits set: 1581/3191 debug1: expecting SSH2_MSG_KEX_DH_GEX_INIT debug1: bits set: 1582/3191 debug1: SSH2_MSG_KEX_DH_GEX_REPLY sent debug1: kex_derive_keys debug1: newkeys: mode 1 debug1: Enabling compression at level 6. debug1: SSH2_MSG_NEWKEYS sent debug1: waiting for SSH2_MSG_NEWKEYS debug1: newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: KEX done debug1: userauth-request for user dwray service ssh-connection method none debug1: attempt 0 failures 0 Failed none for dwray from 192.168.0.14 port 1402 ssh2 Failed none for dwray from 192.168.0.14 port 1402 ssh2 debug1: userauth-request for user dwray service ssh-connection method keyboard-i nteractive debug1: attempt 1 failures 1 debug1: keyboard-interactive devs debug1: auth2_challenge: user=dwray devs= debug1: kbdint_alloc: devices '' Failed keyboard-interactive for dwray from 192.168.0.14 port 1402 ssh2 debug1: userauth-request for user dwray service ssh-connection method password debug1: attempt 2 failures 2 Accepted password for dwray from 192.168.0.14 port 1402 ssh2 debug1: monitor_child_preauth: dwray has been authenticated by privileged proces Accepted password for dwray from 192.168.0.14 port 1402 ssh2 debug1: newkeys: mode 0 debug1: newkeys: mode 1 debug1: Entering interactive session for SSH2. debug1: fd 3 setting O_NONBLOCK debug1: fd 7 setting O_NONBLOCK debug1: server_init_dispatch_20 debug1: server_input_channel_open: ctype session rchan 1 win 65536 max 16384 debug1: input_session_request debug1: channel 0: new [server-session] debug1: session_new: init debug1: session_new: session 0 debug1: session_open: channel 0 debug1: session_open: session 0: link with channel 0 debug1: server_input_channel_open: confirm session debug1: server_input_channel_req: channel 0 request pty-req reply 0 debug1: session_by_channel: session 0 channel 0 debug1: session_input_channel_req: session 0 req pty-req debug1: Allocating pty. debug1: session_pty_req: session 0 alloc /dev/tty0 debug1: server_input_channel_req: channel 0 request shell reply 0 debug1: session_by_channel: session 0 channel 0 debug1: session_input_channel_req: session 0 req shell debug1: fd 4 setting TCP_NODELAY debug1: channel 0: rfd 9 isatty debug1: fd 9 setting O_NONBLOCK debug1: fd 8 setting O_NONBLOCK debug1: server_input_channel_open: ctype direct-tcpip rchan 2 win 131072 max 327 68 debug1: server_request_direct_tcpip: originator 127.0.0.1 port 1443, target 192. 168.0.1 port 5911 debug1: fd 11 setting TCP_NODELAY debug1: channel 1: new [direct-tcpip] debug1: server_input_channel_open: confirm direct-tcpip And there it hangs. Any ideas? Dale Wray [EMAIL PROTECTED] _______________________________________________ VNC-List mailing list [EMAIL PROTECTED] http://www.realvnc.com/mailman/listinfo/vnc-list
