Its pure IP, it should work ok. ( remember netBEUI wont work ) It just wont be able to use name resolution / file sharing if the rest isn't setup. ( the windows specific crap )
This is of course assuming you set the IP, range and subnets to match, try pinging back and forth with the hardcode IP addresses... if you can ping both directions then its NOT your network setup. its something else. And also assuming he meant a Ethernet crossover, not a parallel or serial cable.. > > Message: 1 > Subject: Re: VNC with Crossover Cable > To: [EMAIL PROTECTED] > From: [EMAIL PROTECTED] > Date: Tue, 8 Oct 2002 15:45:47 -0400 > Reply-To: [EMAIL PROTECTED] > > did you establish a workgroup name? just putting a cable between them wont > work if they are not talking to each other. They have to be part of the > same network. > > > Have a Good Day, > > Michael L. _______________________________________________ VNC-List mailing list [EMAIL PROTECTED] http://www.realvnc.com/mailman/listinfo/vnc-list
