See table 2.1: http://www.asminternational.org/documents/10192/3451119/ACFAA5C.pdf/98899692-8a69-446d-ac9a-38b8fab3a160
No material can provide the range of control needed by induction to cover the requirement from a 100C to 1400C reator test. On Mon, Jun 15, 2015 at 11:49 AM, David Roberson <[email protected]> wrote: > Magnetic induction heating does not stop at the Curie point. Any > conductive metal or material can be heated in that manner. The only > requirement is that the resistance of the material remains within a > reasonable range of values. Power is due to (induced current) squared x > (effective resistance) with inductive heating. > > Dave > > > > -----Original Message----- > From: Axil Axil <[email protected]> > To: vortex-l <[email protected]> > Sent: Mon, Jun 15, 2015 11:16 am > Subject: Re: [Vo]:The good, the bad and the ugly > > Magnetic induction stops at the curie point. VHF Microwaves will heat > only the top of the skin of the reactor due to eddy current resistive > heating. Microwave will not penitrate skin so what is inside the reactor > does not matter to the skin heating process. > > Protecting the IR sensor from the microwave radiation will be an > engineering problem . > > On Mon, Jun 15, 2015 at 10:49 AM, Daniel Rocha <[email protected]> > wrote: > >> Why not heating it with magnetic induction? >> > >
