Read Matts post on this subject, Many of the points that you are spinning are covered therein.
https://animpossibleinvention.com/2016/05/16/rossi-makes-offer-on-swedish-factory-building-plus-more-updates/ On Mon, May 16, 2016 at 10:36 PM, Jed Rothwell <jedrothw...@gmail.com> wrote: > Rossi wrote: > > There was also a ventilation system that conveyed the warm air toward the >> windows of the ceiling. Normally we were not inside the E-Cat container, >> where we had to go only in case of reparations or maintainance; here the >> temperature was around 40°C. > > > So, the water coming back into the reactor is at 60°C according to Rossi, > and the reactor is producing 1 MW with very hot steam going out through the > pipes, and there is no ventilation system in the reactor shipping > container, yet somehow the temperature is 20°C cooler than the return > water, not to mention the reactor cells and the steam pipes. I suppose > because the door is open. Even at that, this is an extraordinarily good > AFUE for a device with this geometry, according to HVAC people I have > talked to. > > I doubt it! > > Since there was no excess heat as far as anyone (other than Rossi and > Penon) can tell, it is perfectly plausible that the temperature was ~40°C. > > - Jed > >
