Any chance those patterns are spark traces? Can sparking occur at those tiny 
 This High Voltage Furniture Technique Burns Lightning Designs into Wood
|   |    |


|   |  
This High Voltage Furniture Technique Burns Lightning Designs into Wood
 Lightning is scary and powerful, yet when harnessed correctly, it can become a 
beautiful pattern for hand-crafte...  |   |




      From: Axil Axil <>
 To: vortex-l <> 
 Sent: Friday, September 15, 2017 10:58 PM
 Subject: Re: [Vo]:Info about the fuel me356 uses in his reactor.
The most closely held secret of Rossi's tech is how he produces his fuel. Bos 
Higgins is on the correct path when he considers a high energy mechanism for 
producing the special hydrogen form that is the heart of the LENR fuel. From 
the pictures of ne356 fuel I posted a few days ago, the fuel looked like 
micro-particles but me356 might be using a number of LENR fuel formates. 
I provoked me356 to release the metal grass micrographs that might be metallic 
hydrogen growing out of the metal lattice.
On Fri, Sep 15, 2017 at 10:50 PM, Bob Higgins <> wrote:

The photos of ME356's fuel are fascinating.  I don't know what to make of the 
fractal growth on the carbon sticky tape.  I would love to see an EDS of the 
fractal growth.  Ni crystals do tend to grow when there is sufficient heat and 
in the absence of oxygen, but the Ni crystals are normally spiky spears (as is 
seen in some of the photos).  I can't believe that the fractal growth is 
metallic hydrogen - just too far fetched Axil.

I can speculate about what ME356 does to prepare his fuel.  Here are a few 
   - The fuel is Ni or Ni alloy wire wound into a coil shape that will fit into 
a reactor tube.   

   - From what we have seen, it doesn't seem like ME356's reactor runs a 
current through this coil - it is possible, but it is risks short term burnout 
limiting the life of the reactor.  My guess is that it is just a coiled up wire 
fuel inside of a fused silica or ceramic tube that contains the fuel coil and 
H2 gas.   

   - ME356 talks of pre-treating his fuel.  He says that the longer he 
pre-treats the fuel the more active it is in producing LENR.  I think the 
pre-treatment consists of putting the Ni coil inside a vacuum chamber, that has 
been evacuated to less than 1 micron.  The wire is heated and cooled until it 
stops outgassing.  Then the chamber is filled with about 10 torr of H2, the 
wire is heated, and the wire or an adjacent Ni electrode is driven with RF at 
one of the ISM band frequencies.  This will provide some sputter-like 
activation of the surface.
   - After the hot sputter processing, take the coil out and put it into the 
reactor tube and heat in H2 for LENR.   


Reply via email to