No you don't understand skin effect.
----- Original Message -----
From: "Roarty, Francis X" <francis.x.roa...@lmco.com>
To: <vortex-l@eskimo.com>
Sent: Wednesday, October 12, 2011 3:15 PM
Subject: RE: EXTERNAL: Re: [Vo]:Energy Analyzer for E-Cat
Joe, Peter is correct -XL =6.28fl and real current thru the coil is
"choked" off even though the dc resistance looks like a short. skin effect
is only relevant on small diameter wires but in any case would also be
choked off by the impeadance just like the DC path. The impedance
effectively places itself in series with the circuit limiting any currents
even through magnetic couplings - whatever momentary current goes one way
is stored in the field and then repaid on the alternate cycle. A Coil
would get hot to the touch if it really "dropped" the power like a
resistor but it does not get hot because it is only storing it not
dissipating it.
Fran
-----Original Message-----
From: Joe Catania [mailto:zrosumg...@aol.com]
Sent: Wednesday, October 12, 2011 2:01 PM
To: vortex-l@eskimo.com
Subject: EXTERNAL: Re: [Vo]:Energy Analyzer for E-Cat
Nonsense, high frequencies are subject to skin effect.
----- Original Message -----
From: "Peter Heckert" <peter.heck...@arcor.de>
To: <vortex-l@eskimo.com>
Sent: Wednesday, October 12, 2011 1:31 PM
Subject: Re: [Vo]:Energy Analyzer for E-Cat
Am 12.10.2011 18:39, schrieb Joe Catania:
http://www.omega.com/heaters/pdf/HEATER_INTRO_BAND_REF.pdf, as you can
see this one uses a coiled wire. If not designed properly this could
have high inductance.
If you suceed to make a remarkably high inductance without an iron core,
then you should patent and market this.
You will get rich and famous.
Also Lewan say he injects high frequency at one point.
A series inductance will shift the current phase and reduce the power.
Power maximum is, when inductance is zero.
This is even more true with high frequencies.
Kind regards,
Peter
----- Original Message ----- From: "Terry Blanton" <hohlr...@gmail.com>
To: <vortex-l@eskimo.com>
Sent: Wednesday, October 12, 2011 12:04 PM
Subject: Re: [Vo]:Energy Analyzer for E-Cat
Yep, it's called power factor. You're really on top of things, Joe!
T
On Wed, Oct 12, 2011 at 11:59 AM, Joe Catania <zrosumg...@aol.com>
wrote:
It occurs to me that the means they are using to measure power is
prone to
error. An energy analyzer would be the best way to do it. If there's
any
reactance in the circuit they power calculations they use would be
inaccurate.
