Peter Heckert <[email protected]> wrote: I assume that under the surface of the insulation warm air can distribute. >
Then you should please put some insulation over it, leaving some warm air. No more than 1 mm of air. Not ~1 cm. I believe you are wrong about that. I tested for it, and found no such thing. Exposure to ambient air had an immediate, large effect. But making at "tent" with string, leaving about 1 mm all around, did not affect the measurement. When I say it did not affect it, I mean to within 0.1 deg C. It did not even affect it when I ran cold water through the pipe under the tent. Also there is not probably no trapped air in Rossi's system. Rossi wrapped the insulation tightly, as you see in the video. I doubt there is a 0.1 mm gap between the TC and the metal. Again, because it was tightly wrapped. - Jed
