----- Original Message -----
From: Edmund Storms
To: [email protected]
Cc: Edmund Storms
Sent: Friday, February 07, 2014 10:32 AM
Subject: Re: [Vo]:MIT Course Day 5 -- NiH Systems
Bob and Eric, the issue of transmutation is basic to understanding LENR.
First of all, transmutation has a very high barrier requiring an explanation of
how this can be overcome. Second, the resulting energy has to be dissipated in
ways known to be possible. I propose the hydrogen fusion process provides the
required energy and dissipates much of the excess mass-energy. In other words,
transmutation can not occur unless fusion is taking place at the same time and
place in the material.
We now know that two kinds of transmutation occur. Iwamura shows that D can
be added to a target resulting in a stable heavier product. Most other claims
for transmutation are based on fragments of Pd being found. Explaining these
two different results is the challenge.
In the case of Ni+H, I propose the p-e-p fusion process deposits the
resulting d in the Ni nucleus, resulting in fragmentation of the product in
order to dissipate the excess mass-energy. I believe 2d enter all isotopes of
Ni when the fusion reaction is operating. As a result, the 1.9 MeV obtained
from the p-e-p reaction is added to any energy resulting from occasional
transmutation. When the Ni fissions, it must conserve n and p, which produces a
distribution of products that can be calculated. This calculation shows a
distribution that is consistent with what is reported and reveals Ni-58 to be
the most active isotope for energy production. I will provide much more detail
and justification in my book. Meanwhile, you might consider this proposed
process.
I propose transmutation takes place in the Rossi cell, but he has incorrectly
identified its source and incorrectly attributed the energy to transmutation. I
propose most energy results from p-e-p=d fusion, with transmutation resulting
from fission of Ni adding only a minor amount of energy. If this is the case,
focus on Ni is a waste of time.
Ed Storms
On Feb 7, 2014, at 10:39 AM, Bob Cook wrote:
Eric--
Your bring up some interesting questions about the Rossi reactor. The
information I have included come from Rossi and Focardi's international patent
application noted below.
1. Is Rossi separating Ni isotopes for the Ni he uses in the reactor?
This would be expensive. The natural isotopic abundances are:
Ni-58, 68.08%;
Ni-59, 0%--its radioactive with 1/2 life of 80,000 years;
Ni 60, 26.22%;
Ni-61, 1.14%;
Ni-62, 3.63%;
Ni-63, 0%--its radioactive with 1/2 life of 92 years;
Ni-64, 0.93%.
I would pick Ni-60 because it is more than one transmutation (Ni-proton
fusion) away from a radioactive residue.
2. Is there radioactive ash (Ni-59 or Ni-63) left in the spent reactors?
Rossi and Focardi seem to contradict themselves with the statements
below:
"...we believe that form of energy involved is nuclear, and more
specifically, due to fusion processes between protons and Nickel nuclei.
They are exothermic with an energy release in the range 3-7,5 MeV,
depending on the Nickel isotope involved."
"No radioactivity has been found also in the Nickel residual from
the process."
This information attributed to Focardi and Rossi comes from their
instructive statements, which suggest the nuclear Ni-proton fusion, in the
following paper:
A new energy source from nuclear fusion
S. Focardi(1) and A. Rossi(2)--(1)Physics Department Bologna University and
INFN Bologna Section, (2)Leonardo Corp. (USA) - Inventor of the Patent, March
22, 2010 (international patent publication N. WO 2009/125444 A1)
My final observation is that the Rossi-Focardi comment that there is no
radioactivity in the residue needs to be checked. Other Ni-hydrogen materials
that have been produced by other experimenters should be carefully checked for
both the potential radioactive Ni isotopes---Ni-59 and Ni-63. They should be
easy to detect given their well known decay modes and probable gamma emissions.
(I will look up this information and put it in a subsequent comment.) I know
that both Ni-59 and Ni-63 are problems when it comes to nuclear waste disposal
of activated metals.) A null radioactivity essay would be revealing as to the
process actually occurring in the Ni-hydrogen reactions.
Bob
----- Original Message -----
From: Eric Walker
To: [email protected]
Sent: Thursday, February 06, 2014 7:45 PM
Subject: Re: [Vo]:MIT Course Day 5 -- NiH Systems
On Thu, Feb 6, 2014 at 2:26 PM, Bob Cook <[email protected]> wrote:
Also I suspect that the nano Ni that is produced is pretty pure. That
may be why Rossi uses it and may be the reason other researchers do not have
very good luck at getting a good reaction.
I'm guessing that the purity of Rossi's nickel (in terms of 62Ni and
64Ni) is related to avoiding beta-plus and beta-minus decay, and, with
beta-plus decay, the 511 keV positron-electron annihilation photons.
Some vorts may enjoy this video of a small cloud chamber [1]. It's
remarkable that such a small event can have macroscopic effects.
Eric
[1] http://www.youtube.com/watch?v=xQVMrkJYShc
